Skip to content
OceanSphereENGINES
Library › Inspection & safety data › Approvals
Inspection & safety data

Look up approvals

Entries from public approval registers, searchable by manufacturer. Only number, body, status and validity as listed in the register are shown.

21,417 entries. The status is taken from the register as of the retrieval date (see source); the register itself is authoritative.

ManufacturerProductTypeNumberBodyStatusvalid untilSource
ISOLATEK INTERNATIONALType "JN" sprayed fiber insulation, approved in nominal density of 13.5 pounds per cubic foot (216 kg/cu. m).NON-COMBUSTIBLE MATERIALcgmix:14700USCGFORMER-MAY USE2002-03-20USCG CGMIX Approved Equipment
Isoleermaterialenindustrie Pull B.V.HexaNaval ST & ALSurface materials and floor coverings with low flame-spread characteristics: decorative veneers.MERD0001N0Y-0UK Approved Body 97New2031-02-03UK Marine Equipment Database (MCA)
Isoleermaterialenindustrie Pull B.V.Phonkiller M2C CarbonSurface materials and floor coverings with low flame-spread characteristics: adhesives used in the construction of 'A', 'B' & 'C' class divisionsMERB0001N2Z-0UK Approved Body 97New2031-06-17UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Fire Resisting Material – Type: “Airisol Flex” and “Airisol Board” (24-78 kg/m³)Non-combustible materialsLR2593968UKMBUK Approved Body 8512New2029-09-11UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Fire Resisting Material – Type: “Airisol Flex” and “Airisol Board” (24-78 kg/m³)Non-combustible materialsLR2656470UKMDUK Approved Body 8512New2026-12-02UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Fire-Resisting Material-Type :" Airisol Fabric (ZW100)"Non-combustible materialsLR26274191UKMBUK Approved Body 8512New2031-08-31UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Surface Finish Material – Type: ‘Airisol Aluminium 20 micron grp reinforced’ aluminium foil reinforced with GRP bonded to non-combustible substrate (18kg/m³ or higher density). Substrate may be produced in profiled shape type ‘Airisol/CalRoc Profile insulation’.Surface materials and floor coverings with low flame-spread characteristics: decorative veneers.LR2593969UKMBUK Approved Body 8512New2030-06-07UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Surface Finish Material – Type: ‘Airisol Aluminium 20 micron grp reinforced’ aluminium foil reinforced with GRP bonded to non-combustible substrate (18kg/m³ or higher density). Substrate may be produced in profiled shape type ‘Airisol/CalRoc Profile insulation’.Surface materials and floor coverings with low flame-spread characteristics: decorative veneers.LR2656470UKMDUK Approved Body 8512New2026-12-02UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Surface Finish Material – Type: ‘Airisol Aluminium 50 microns’ aluminium foil reinforced with GRP bonded to non-combustible substrate (18kg/m³ or higher density). Substrate may be produced in profiled shape type ‘Airisol/CalRoc Profile insulation’.Surface materials and floor coverings with low flame-spread characteristics: decorative veneers.LR2593973UKMBUK Approved Body 8512New2028-05-13UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Surface Finish Material – Type: ‘Airisol Aluminium 50 microns’ aluminium foil reinforced with GRP bonded to non-combustible substrate (18kg/m³ or higher density). Substrate may be produced in profiled shape type ‘Airisol/CalRoc Profile insulation’.Surface materials and floor coverings with low flame-spread characteristics: decorative veneers.LR2656470UKMDUK Approved Body 8512New2026-12-02UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Surface Finish Material – Type: ‘Airisol Marine Cloth’ fibre fabric material bonded to non-combustible substrate (18 kg/m³ or higher density). Substrate may be produced in profiled shape type ‘Airisol/CalRoc Profile insulation’Surface materials and floor coverings with low flame-spread characteristics: decorative veneers.LR2593972UKMBUK Approved Body 8512New2028-05-13UK Marine Equipment Database (MCA)
ISOPARTNER Nederland B.V.Surface Finish Material – Type: ‘Airisol Marine Cloth’ fibre fabric material bonded to non-combustible substrate (18 kg/m³ or higher density). Substrate may be produced in profiled shape type ‘Airisol/CalRoc Profile insulation’Surface materials and floor coverings with low flame-spread characteristics: decorative veneers.LR2656470UKMDUK Approved Body 8512New2026-12-02UK Marine Equipment Database (MCA)
ISOVOLTA AG"Standard Grade" laminated plastic type interior finish, in 1 mm nominal thickness.INTERIOR FINISHcgmix:14841USCGFORMER-MAY USE2000-03-10USCG CGMIX Approved Equipment
ITW AMERICAN SAFETY TECHNOLOGIESMS-7CZ Primer / MS-440G Non-skid deck covering system tested in accordance with the IMO FTP Code, Parts 2 & 6.FLOOR FINISH (SOLAS)cgmix:15366USCGEXPIRED2014-12-07USCG CGMIX Approved Equipment
ITW Polymers Sealants North America"PolySpec FLEX IMO" floor covering approved as meeting Parts 2 and 5 of Annex 1 of the IMO FTP Code.FLOOR FINISH (SOLAS)cgmix:15353USCGEXPIRED2018-06-23USCG CGMIX Approved Equipment
ITW Polymers Sealants North America"PolySpec LITE LATEX" primary deck covering approved to a maximum thickness of 0.375 inches (9.53 mm) with a nominal density of 1.8 lb/sq ft. per 0.25 inch thickness (8.8 kg/sq meter per 6.35 mm thickness).PRIMARY DECK COVERINGS (IMO)cgmix:14975USCGEXPIRED2023-06-23USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolySpec 8K Deck Insulation System is approved as meeting 2010 IMO Fire Test Procedures Code, Parts 1 and 3.DECK ASSEMBLY (IMO)cgmix:14945USCGEXPIRED2025-07-29USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolyspec Flex IMO Base Coat Seamless Floor System is approved as meeting Parts 2 and 5 of Annex 1 of the 2010 FTP Code at a maximum thickness of 3.4 mm.PRIMARY DECK COVERINGS (IMO)cgmix:14996USCGEXPIRED2024-07-17USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolyspec Flex IMO Base Coat Seamless Floor System is approved as meeting Parts 2 and 5 of Annex 1 of the 2010 FTP Code at a maximum thickness of 3.9 mm.FLOOR FINISH (SOLAS)cgmix:15375USCGEXPIRED2024-07-17USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolyspec Flex IMO Top Coat Seamless Floor System is approved as meeting Parts 2 and 5 of Annex 1 of the 2010 FTP Code at a maximum thickness of 3.4 mm.FLOOR FINISH (SOLAS)cgmix:16697USCGEXPIRED2024-07-17USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolyspec Flex IMO Top Coat Seamless Floor System is approved as meeting Parts 2 and 5 of Annex 1 of the 2010 FTP Code at a maximum thickness of 3.4 mm.PRIMARY DECK COVERINGS (IMO)cgmix:16702USCGEXPIRED2024-07-17USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolyspec Ultralite TG Underlayment System is approved as meeting Parts 2 and 5 of Annex 1 of the 2010 FTP Code at a maximum thickness of 31 mm.FLOOR FINISH (SOLAS)cgmix:16698USCGEXPIRED2024-07-17USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaPolyspec Ultralite TG Underlayment System is approved as meeting Parts 2 and 5 of Annex 1 of the 2010 FTP Code at a maximum thickness of 31 mm.PRIMARY DECK COVERINGS (IMO)cgmix:16703USCGEXPIRED2024-07-17USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaType "PolySpec 7K" magnesium oxychloride cement deck assembly meeting Part 1 and Part 3 of Annex 1 of the IMO FTP Code.DECK ASSEMBLY (IMO)cgmix:14938USCGEXPIRED2018-06-23USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaType "PolySpec FLEX IMO" primary deck covering approved as meeting Parts 2 and 6 of Annex 1 of the IMO FTP Code.PRIMARY DECK COVERINGS (IMO)cgmix:14963USCGEXPIRED2018-06-23USCG CGMIX Approved Equipment
ITW Polymers Sealants North AmericaType "PolySpec IMO CLAD" primary deck covering approved as meeting Parts 2 and 6 of Annex 1 of the IMO FTP Code.PRIMARY DECK COVERINGS (IMO)cgmix:14979USCGEXPIRED2021-04-12USCG CGMIX Approved Equipment
Izo Tech Osadnik sp. z o.oiT-C430P1Surface materials and floor coverings with low flame-spread characteristics: pipe insulation coversMERB0000984UK Approved Body 97New2030-03-25UK Marine Equipment Database (MCA)
Izo Tech Osadnik sp. z o.oiT-C430P1 - JB2025050708 (10500m)Surface materials and floor coverings with low flame-spread characteristics: pipe insulation coversMERF000022JUK Approved Body 97New–UK Marine Equipment Database (MCA)
Izo Tech Osadnik sp. z o.oiT-C430S1Surface materials and floor coverings with low flame-spread characteristics: pipe insulation coversMERB0000985UK Approved Body 97New2030-03-25UK Marine Equipment Database (MCA)
Izo Tech Osadnik sp. z o.oiT-C430S1 - JB2025032901 (479m), JB2025040301 (3008m), JB2025050903 (3960m), JB2025051902 (3061m)Surface materials and floor coverings with low flame-spread characteristics: pipe insulation coversMERF000022HUK Approved Body 97New–UK Marine Equipment Database (MCA)
Izo Tech Osadnik sp. z o.oiT-C930HTNon-combustible materialsMERB0000986UK Approved Body 97New2030-03-25UK Marine Equipment Database (MCA)
Izo Tech Osadnik sp. z o.oiT-C930HT - JB2024122503 (100m), JB2025061702 (1150m), JB2025061703 (1000m)Non-combustible materialsMERF000022GUK Approved Body 97New–UK Marine Equipment Database (MCA)
iZone ImagingInterior Custom High-Pressure Laminate in a thickness of 0.035 in. +/- 0.005 in. approved as meeting Parts 2 and 5 of Annex 1 of the 2010 IMO FTP Code.INTERIOR FINISH (IMO)cgmix:17420USCGEXPIRED2025-10-14USCG CGMIX Approved Equipment
J C PENNY CO, INCGroup approval, kapok.KAPOK OR FIBROUS GLASS BUOYANT CUSHIONcgmix:4089USCGFORMER-MAY USE1971-04-28USCG CGMIX Approved Equipment
J C PENNY CO, INCGroup approval, kapok.KAPOK OR FIBROUS GLASS BUOYANT CUSHIONcgmix:4104USCGFORMER-MAY USE1971-07-16USCG CGMIX Approved Equipment
J C PENNY CO, INCGroup approval, kapok.KAPOK OR FIBROUS GLASS BUOYANT CUSHIONcgmix:4111USCGFORMER-MAY USE1973-05-25USCG CGMIX Approved Equipment
J C PENNY CO, INCModel 3, adult.KAPOK LIFE PRESERVERcgmix:1447USCGFORMER-MAY USE1970-02-18USCG CGMIX Approved Equipment
J C PENNY CO, INCModel 5, child.KAPOK LIFE PRESERVERcgmix:1448USCGFORMER-MAY USE1970-02-18USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model AK-1, adult.KAPOK BUOYANT VESTcgmix:3780USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model AK-1, adult.KAPOK BUOYANT VESTcgmix:3810USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model AK-1, adult.KAPOK BUOYANT VESTcgmix:3828USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model CKM-1, child.KAPOK BUOYANT VESTcgmix:3781USCGFORMER-MAY USE1971-04-28USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model CKM-1, child.KAPOK BUOYANT VESTcgmix:3811USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model CKM-1, child.KAPOK BUOYANT VESTcgmix:3829USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model CKS-1, child.KAPOK BUOYANT VESTcgmix:3782USCGFORMER-MAY USE1971-04-28USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model CKS-1, child.KAPOK BUOYANT VESTcgmix:3812USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType I, Model CKS-1, child.KAPOK BUOYANT VESTcgmix:3830USCGFORMER-MAY USE1973-01-02USCG CGMIX Approved Equipment
J C PENNY CO, INCType II, Model AD, adult.UNICELLULAR PLASTIC FOAM BUOYANT VESTcgmix:4910USCGFORMER-MAY USE1970-02-18USCG CGMIX Approved Equipment
J C PENNY CO, INCType II, Model AE, Adult.UNICELLULAR POLYETHYLENE FOAM BUOYANT VESTcgmix:5352USCGFORMER-MAY USE1970-09-08USCG CGMIX Approved Equipment
J C PENNY CO, INCType II, Model MD, child.UNICELLULAR PLASTIC FOAM BUOYANT VESTcgmix:4911USCGFORMER-MAY USE1970-02-18USCG CGMIX Approved Equipment