OceanSphere
Engines

Accommodation Light

medium 36 models total

Accommodation lighting runs on the ship's normal supply and switches over on blackout, but it is not the same fixture as emergency lighting - mixing the two up in a refit leaves cabins lit that should be dark, and escape routes dark that should be lit.

Read more — Accommodation Light explained ▾

What sets accommodation lighting apart from navigation and emergency lighting

Accommodation lighting covers the general-purpose fixtures in cabins, mess rooms, offices, and public spaces - the lighting crew live and work under day to day. It runs from the normal supply and is not required to hold a fire rating or a specific colour temperature the way navigation lights do, and it is a separate system from the emergency lighting that must come on automatically from the emergency source when the main supply fails. A fixture can look identical on the outside and still be the wrong one for its location if it lacks the certification a specific space requires.

Accommodation light fixture section
Cross section of a ceiling-mounted accommodation light fixture showing the housing, LED lamp, driver, diffuser lens and terminal box fed from the ship's normal lighting circuit rather than the emergency supply.

Main components

Luminaire and diffuser

LED panel or fitting with a diffuser rated for the space - impact-resistant polycarbonate in workshops and machinery-adjacent alleyways, standard diffusers in cabins and offices.

Driver

The LED driver converts the ship's supply to the low-voltage DC the diodes need; driver failure, not LED failure, is the most common reason a modern fixture goes dark.

Mounting and enclosure rating

IP rating and, in machinery spaces or on weather-exposed accommodation exteriors, explosion-proof or increased-safety certification where the space classification requires it.

Selection criteria

  • Colour temperature and CRI - warmer temperatures, around 3000K, in cabins for rest, cooler and higher CRI in galleys and medical spaces for task visibility.
  • IP rating - IP44 or better for damp spaces like laundries and showers, higher again for weatherdeck accommodation exteriors.
  • Driver compatibility with dimming circuits, where fitted, since not every driver dims cleanly on the ship's control system.
  • Vibration rating - fixtures near machinery casings or steering gear flats need a higher vibration tolerance than a standard office fitting.

Regulations and class requirements

SOLAS Ch. II-1 sets general requirements for the main and emergency lighting systems, and class rules for electrical installations cover circuit protection, cable routing, and IP rating by space type. Accommodation lighting itself is lightly regulated compared with emergency and escape lighting, but the circuit design - protection, isolation, and how accommodation lighting sheds load on blackout - falls under the same electrical survey as the rest of the ship's low-voltage distribution.

Typical faults

  • Driver failure mistaken for LED failure - the whole fixture gets replaced when only the driver needed swapping, at several times the cost.
  • Wrong IP rating fitted in a damp space - condensation gets into the driver housing and shortens its life well below the rated hours.
  • Dimming flicker after a driver batch change - a supplier substitution changes the driver's dimming curve without anyone updating the control panel settings.
  • Standard fixtures installed where explosion-proof was specified - found on refits where the replacement was sourced by fixture size rather than by space classification.

What to look for in a supplier

  • Stated rated hours and driver warranty separate from the LED module warranty.
  • IP and, where relevant, hazardous-area certification matched to the actual space, not a generic marine rating.
  • Consistent colour temperature across a batch order, since mismatched fixtures in the same corridor are an obvious refit tell.
  • Spares availability for the driver specifically, which is the part that actually fails.

When replacing accommodation fixtures during a refit, order by space classification first and fixture size second - a like-for-like physical fit that drops the IP or hazardous-area rating is an invisible mistake until the space fails a survey.

Inspector Mode Show All 36 total

1 manufacturers · 36 models

Glamox Marine

36
Glamox C65 Cabin 10W IP44 3000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 10W IP44 4000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 10W IP44 5000K
Glamox C65 Cabin 10W IP44 5000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 10W IP44 6500K
Glamox C65 Cabin 10W IP44 6500K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 10W IP55 3000K
Glamox C65 Cabin 10W IP55 3000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 10W IP55 4000K
Glamox C65 Cabin 10W IP55 4000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 10W IP55 5000K
Glamox C65 Cabin 10W IP55 5000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 10W IP55 6500K
Glamox C65 Cabin 10W IP55 6500K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 10W IP66 3000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 10W IP66 4000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 10W IP66 5000K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 10W IP66 6500K
Wattage (W)
10
Lumen
1000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP44 3000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP44 4000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP44 5000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP44 6500K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP55 3000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP55 4000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP55 5000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP55 6500K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP66 3000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP66 4000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP66 5000K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 15W IP66 6500K
Wattage (W)
15
Lumen
1500
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP44 3000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP44 4000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP44 5000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP44 6500K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP44
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 20W IP55 3000K
Glamox C65 Cabin 20W IP55 3000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 20W IP55 4000K
Glamox C65 Cabin 20W IP55 4000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP55 5000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox Marine Glamox C65 Cabin 20W IP55 6500K
Glamox C65 Cabin 20W IP55 6500K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP55
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP66 3000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
3000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP66 4000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
4000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP66 5000K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
5000
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet
Glamox C65 Cabin 20W IP66 6500K
Wattage (W)
20
Lumen
2000
Ingress Protection (IP)
IP66
Zone
safe area
Colour Temperature (K)
6500
Light Source
LED
Technical Specifications
IP-Schutzart (Salzwasserumgebung)
IP66/67 empfohlen (tiefgezogener 316L-Edelstahl, pulverbeschichtet); min. IP44 für Hospital/reine Bereiche
Zertifizierung (Explosion)
ATEX II 2G Ex eb mb IIC T4 Gb / EN 60079 (Zone 2); IECEx, UL/CSA (Nordamerika), INMETRO (Brasilien)
Lebensdauer LED-Module
100.000 h @ 45°C Umgebungstemperatur; lange Wartungsintervalle
Lichteigenschaften
CRI ≥80; CCT 4000-5000K (Tageslicht); Lumenoptionen: 2200-18.000 lm (abhängig Modul/Typ)
Material-korrosionsschutz
Aluminium alloy (seawater-resistant) or deep-drawn 316L stainless steel; glands/connections protected against seawater, chemicals
Notbeleuchtung (GRX3)
Options 1.5 h (E1) or 3 h (E3); FR GRX3-E (integrated) or FR GRX-EB (battery box)
Product Lines
  • TX61 LED (Zone 2, 2200-4500 Lm)
  • TX65 LED
  • FX60 LED Floodlight (Zone 1/2)
  • GRX3 LED (Zone 1, Innenraum mit Notbeleuchtung)
  • MAX LED/MAX G2
  • MIX LED/MIX G2
  • RLX CXZ1 Floodlight
Common Failures & Inspection Points
  • Area: IP-Schutzart Verschlechterung (Wasser-/Salzwassereinbringung)
    Check: Visuell: Korrosion an Gehäuse, Glands, Befestigungen (Rost, Pitting); Funktionell: IEC 60529 Wasserstrahl-Test (IPX5/6 für Hochdruck-Reinigung, IPX7/8 für Eintauchbereiche); Dichtheitsprüfung Gehäuse, Gasketeintegrität (Silikon/EPDM bevorzugt)
  • Area: ATEX/Ex-Zertifizierung Gültigkeit & Dokumentation
    Check: Verify certificate (Unit Verification or Type Exam + Product Verification); check Zone 2/22 compliance; label/marking on luminaire (II 2G Ex eb mb IIC T4 Gb); annual inspection by qualified person (CompEx-certified); document any changes to equipment
  • Area: Notbeleuchtung-Funktion & Batterie-Kapazität (GRX3 mit E1/E3)
    Check: Functional test: AC voltage shutdown > 3 seconds, confirm LED activation; visual battery inspection (corrosion, secure connections); load test (annually): minimum duration 1.5 h (E1) or 3 h (E3) with ≥50 lux lighting on evacuation route; SOLAS compliance (automatic activation on power failure)
  • Area: Korrosion & Materialintegrität (Salzwasser/Hochdruckreinigung)
    Check: Surface inspection: 316L stainless steel for pitting, scratches (ASTM B117 salt spray standard); fasteners for corrosion (M25 brass fittings preferred); coating (powder paint) for damage; drainage holes free from obstruction; replace critical parts as needed (simple replacement with screwdriver possible)
  • Area: LED-Modul-Helligkeit & Lichtqualität
    Check: Visual: check luminous intensity (comparison with similar luminaires); spectral/color temperature check (maintain CRI ≥80, no color cast); measurement point: check target area (50 lux emergency areas, higher for work areas); operating hours > 100,000 h → prepare for replacement (LED modules interchangeable)
  • Area: Betriebsspannung & Stromversorgung-Stabilität
    Check: Measure input voltage (check rated voltage, e.g. 220–254V AC); check for voltage spikes/fluctuations (no stability = electronics risk); check safety switches/contacts for wear; exclude temporary power supply (construction phase) → only permanent connections permitted

Generic type inspection/maintenance points for Lighting (Glamox Marine, Mega-Swarm 2026-06). Per-model specs not auto-populated.

Manufacturer Datasheet
Datasheet