UV-Based BWMS · Ballast Water Treatment Systems
Optimarin UV BWMS 750m3h ABS-approved is identified in the source list as a uv-based bwms. It is installed in the ballast-water treatment plant between sea suction, ballast pumps, ballast tanks and discharge piping according to the vessel's approved BWMS arrangement. Its purpose is to treat ballast water using the process identified by the category so uptake and discharge meet the approved environmental performance standard. The source record provides a stated power of 37.5 kW. Treatment reactors, filters where fitted, cells or lamps, sensors, valves, control software and sampling points form part of a certified system whose configuration must remain controlled. The exact model designation and any source-listed power or capacity distinguish treatment throughput and process configuration from neighboring BWMS variants; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Optimarin first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect treatment reactors, filters, sensors, valves, pumps and control panels according to the approved BWMS maintenance plan. Keep ultraviolet sleeves, electrolytic cells or filter elements clean as applicable to the installed process. Verify flow, treatment-status and sampling indications and investigate recurring bypass or low-treatment alarms. Function-test automatic valves and record any bypass or treatment interruption in accordance with vessel procedures. Maintain calibration and service records for compliance-critical sensors. Refer to the manufacturer documentation for the exact figure for treatment limits, cleaning criteria, consumables and calibration values.
Keep process-specific lamps, sleeves, electrolytic-cell service parts or filter elements as applicable, together with seals, sensors, actuators and manufacturer-recommended control spares. Replacement components must preserve the approved system configuration. Carry consumables appropriate to expected ballast operations and voyage duration.
Free of charge — we forward your request to qualified suppliers for Optimarin equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Optimarin UV BWMS 750m3h ABS-approved — a part, a service call, a second opinion. Are you Optimarin? Claim this brand page.
Service engineer? Write the day report for this UV BWMS 750m3h ABS-approved in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.