InvaSave 9600m3h
Hyde/Calgon InvaSave 9600m3h is a shipboard unit in the Ballast Water Treatment Systems group, classified in the source as Electrochlorination BWMS. It is normally installed in ballast pump rooms, engine-room treatment spaces or dedicated BWTS compartments connected to ballast piping. Its primary duty is to treat ballast water before discharge using filtration and UV, electrolysis or electrochlorination so organisms are controlled in accordance with the approved system. In service it interfaces with ballast pumps and piping, filters, UV reactors or electrolytic cells, TRO/quality sensors, dosing/neutralization and automation. The source record states a power rating of 288.0 kW for this exact variant; this information is retained unchanged and distinguishes it from neighboring entries in the same product family. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect filters and backflush, UV or electrolytic treatment components, sensors/sample lines, valves, dosing/neutralization and event records; exact operating limits and calibration criteria come from the approved type-specific documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →