Marine Generator / Alternator · Power Generation
The Stamford/Cummins PI7 is a marine diesel‑driven generator set delivering up to 2000 kVA at 440 V, 60 Hz, designed for high‑power auxiliary and emergency applications on large vessels. The supplied category identifies it as Alternator, and it is normally installed in the engine room or generator space, mechanically coupled to a diesel engine, turbine, shaft drive or other prime mover. In that role, its primary purpose is to convert mechanical power into three-phase electrical power for the shipboard distribution system. Alternator variants differ in frame size, voltage, frequency, excitation and cooling, but all depend on winding insulation, bearings, excitation and stable prime-mover speed. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Stamford/Cummins first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect winding cleanliness, insulation condition, bearings, cooling air path, terminals, excitation equipment and signs of overheating. Trend insulation, vibration and winding or bearing temperatures and review AVR or protection alarms. Verify voltage and reactive-load behaviour during normal operation. Refer to the manufacturer documentation for the exact figure for insulation, bearing, excitation and electrical limits.
Carry AVR or excitation modules where supported, rotating-diode sets, bearings, temperature sensors, fuses, terminal hardware and approved cleaning or insulation-maintenance materials.
Free of charge — we forward your request to qualified suppliers for Stamford/Cummins equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Stamford/Cummins PI7 2000kVA 440V 60Hz — a part, a service call, a second opinion. Are you Stamford/Cummins? Claim this brand page.
Service engineer? Write the day report for this PI7 2000kVA 440V 60Hz in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.