Bilge Water Separator · Separators & Purifiers
Kangrim Kangrim KBW-2 500l/h is listed in the source as a marine Bilge Water Separator within the Separators & Purifiers group. Equipment of this type is typically installed in an engine-room or treatment space close to the associated tanks, pumps and overboard or service piping. Its primary duty is separating, purifying or treating shipboard fluids for the duty represented by the Bilge Water Separator, and it uses its treatment stage together with pumps, valves, filters or separators, instrumentation and automatic controls to achieve the required process condition. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with feed and discharge piping, pumps, tanks, sampling or monitoring equipment, ship power and automation or overboard interlocks as applicable. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Kangrim first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect filters or treatment elements, pumps, valves, piping, sampling points and monitors, and review trend data for loss of throughput or abnormal pressure. Verify alarms, automatic diversion or interlocks where applicable and check cleanliness of sensors and sample lines. Use statutory procedures and manufacturer documentation for exact discharge, treatment and calibration limits.
Typical spares include filters or treatment elements, seal and gasket kits, pump service parts, lamps or electrodes where applicable, monitor consumables, sensors and valve or actuator repair items.
Free of charge — we forward your request to qualified suppliers for Kangrim equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Kangrim KBW-2 500l/h — a part, a service call, a second opinion. Are you Kangrim? Claim this brand page.
Service engineer? Write the day report for this KBW-2 500l/h in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.