Bilge Water Separator · Separators & Purifiers
Kangrim Kangrim KBW-1 2000l/h — Separators & Purifiers. The supplied category identifies the equipment as Bilge Water Separator, and it is normally installed in the engine-room bilge or liquid-treatment area with pumps, sludge handling, monitoring and approved discharge or recirculation piping. In that listed role, its primary purpose is to separate oil, water or solids from a process stream before reuse, storage or permitted discharge. Centrifugal purifiers and oily-water separators use different separation principles, so bowl, coalescer, monitor and discharge arrangements must be identified from the installed system. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Kangrim first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the separation element or bowl, filters, pumps, seals, monitoring, sample lines and sludge or discharge arrangements. Review outlet quality and operating trends and verify that approved discharge paths cannot be bypassed where statutory controls apply. Clean and test monitors according to the approved procedure. Refer to the manufacturer documentation for the exact figure for flow, temperature, pressure and calibration criteria.
Carry filters or coalescers, bowl or seal kits as applicable, pump seals, monitor service parts, solenoids, sample-line fittings, gaskets and selected sensors.
Free of charge — we forward your request to qualified suppliers for Kangrim equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Kangrim KBW-1 2000l/h — a part, a service call, a second opinion. Are you Kangrim? Claim this brand page.
Service engineer? Write the day report for this KBW-1 2000l/h in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.