Sludge Separator · Separators & Purifiers
Pieralisi Pieralisi FP 1200 SL 1000l/h sludge is identified in the source list as a sludge separator. It is normally installed or arranged in the engine-room bilge, sludge, fuel or lubricating-oil treatment area. Its purpose is to separate oil, water and solids according to the listed process. The source record provides no additional model-specific operating figure beyond the listed designation and category. The equipment is based on rotating bowl or separation vessel, feed, discharge and controls. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Pieralisi first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect bearings, lubrication, seals, couplings, foundations, process connections and protective devices. Trend vibration, temperature, pressure, flow and motor load where available and investigate deterioration from the established normal condition. Check for leakage, corrosion, fouling and abnormal mechanical contact. Function-test local and remote controls, alarms and shutdowns after maintenance. Maintain cleanliness during opening and reassembly. Refer to the manufacturer documentation for the exact figure for clearances, limits, settings and overhaul criteria.
Keep model-correct seals, gaskets, bearings, filters or strainers, coupling parts, sensors and manufacturer-recommended wear components. Critical installations may justify a rotating assembly, motor or control module according to redundancy. Confirm all parts against the exact model and serial number.
Free of charge — we forward your request to qualified suppliers for Pieralisi equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Pieralisi FP 1200 SL 1000l/h sludge — a part, a service call, a second opinion. Are you Pieralisi? Claim this brand page.
Service engineer? Write the day report for this FP 1200 SL 1000l/h sludge in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.