Brazed Plate Heat Exchanger · Heat Exchangers
SWEP SWEP B12 500kW LO cooling is a shipboard unit in the Heat Exchangers group, classified in the source as Brazed Plate Heat Exchanger. It is normally installed in engine-room cooling, heating, fuel, lube-oil, HVAC or freshwater circuits. Its primary duty is to transfer heat between two fluid circuits without intentionally mixing them. In service it interfaces with piping, isolation valves, pumps, temperature/pressure sensors and the connected cooling or heating systems. Compared with neighboring entries in the same product family, this record is the exact SWEP SWEP B12 500kW LO cooling variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, SWEP first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect for leakage, fouling, corrosion and abnormal pressure drop; clean heat-transfer surfaces using approved methods, inspect gaskets and verify connected strainers and flow conditions; exact tightening dimensions and test pressures come from manufacturer documentation.
Keep approved gasket sets for plate units, sealing materials, vent/drain fittings and replacement plates or service kits according to criticality.
Free of charge — we forward your request to qualified suppliers for SWEP equipment from our network of over 114,000 maritime companies.
Tell us what you need for this SWEP B12 500kW LO cooling — a part, a service call, a second opinion. Are you SWEP? Claim this brand page.
Service engineer? Write the day report for this B12 500kW LO cooling in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.