Exhaust Gas Boiler · Boilers
The KEPCO KEG Series is an exhaust gas boiler. It is normally installed in a diesel-engine exhaust path connected to the vessel's boiler-water and steam system. It is designed for steam generation by recovering energy from hot engine exhaust gas. In operation, exhaust gas transfers heat through boiler surfaces to water/steam without additional firing. Compared with neighbouring models, the relevant differences are exhaust flow, heating surface, steam conditions, circulation and pressure rating; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on soot, circulation, tube leakage, water treatment, soot-fire risk and expansion. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect pressure parts or heater coils, heat-source/burner and refractory where applicable, gas-side cleanliness, circulation/feed systems and water or thermal-fluid condition. Verify level, pressure, temperature, flow, safety valves and shutdown/interlock functions applicable to the design. Review treatment, blowdown, soot-cleaning and operating records and use manufacturer/class procedures for pressure tests.
Carry approved gaskets, valve service parts, relevant pump seals/bearings, temperature/pressure/level sensors and heat-source-specific spares such as burner ignition/flame components or soot-cleaning parts. Pressure-part repair materials should only be used under approved manufacturer and class procedures.
Free of charge — send us your request for KEPCO equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, KEPCO first.
Tell us what you need for this KEPCO KEG Series — a part, a service call, a second opinion. Are you KEPCO? Claim this brand page.
Service engineer? Write the day report for this KEG Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.