Ballast Pump · Pumps
Shinko Industries Shinko RV 1000/260 is listed in the source as a marine Ballast Pump within the Pumps group. Equipment of this type is typically installed in the engine room, pump room, cargo tank or machinery space appropriate to the liquid service and vessel arrangement. Its primary duty is moving the specified liquid for the shipboard duty represented by the Ballast Pump, and it depends on the pump element, driver, bearings, shaft or coupling, seals and suction/discharge system maintaining the required flow path without air ingress or restriction. The supplied entry records Pumps, ballast; these stated values should be retained when the unit is identified or compared with neighboring variants. It normally interfaces with the connected suction and discharge piping, valves, strainers, electrical or hydraulic drive, instrumentation and control system as fitted. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Shinko Industries first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect for leakage, vibration, abnormal noise, bearing condition, coupling alignment, seal condition and secure foundations. Check suction strainers, valves and piping for restrictions or air ingress and confirm that instruments and protection devices respond correctly. Compare operating condition with the maker's documentation and vessel records; refer to manufacturer documentation for exact clearances and wear limits.
Hold the maker-recommended seal kit, gaskets, bearings, coupling elements, strainers or filter parts and selected internal wear components appropriate to the specific pump and liquid service.
Free of charge — we forward your request to qualified suppliers for Shinko Industries equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Shinko Industries Shinko RV 1000/260 — a part, a service call, a second opinion. Are you Shinko Industries? Claim this brand page.
Service engineer? Write the day report for this Shinko RV 1000/260 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.