Cargo Pump (Deepwell) · Pumps
Framo TransRec Series is a marine deepwell cargo pump. It is normally installed vertically in a cargo tank or pump well with the drive and service connections arranged at tank top. Its primary purpose is to transfer liquid cargo directly from the tank through the cargo piping system. Compared with central pump-room arrangements, a deepwell pump places the pumping element within the individual tank and therefore requires attention to long shafts, bearings, seals and tank-top interfaces. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect tank-top seals, drive, bearings, vibration, discharge pressure and leakage. Confirm stripping and minimum-liquid operating practices follow the approved cargo procedure. Monitor condition during cargo operations and investigate abnormal vibration immediately. Exact clearances, minimum levels and wear limits require manufacturer documentation.
Carry seal kits, bearings or bushings where approved for onboard service, drive-system spares, gaskets and critical pump-stage components identified by the manufacturer.
Free of charge — send us your request for Framo equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Framo first.
Tell us what you need for this Framo TransRec Series — a part, a service call, a second opinion. Are you Framo? Claim this brand page.
Service engineer? Write the day report for this TransRec Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.