Stern Tube Bearing · Shaft Line Equipment
Blohm+Voss B+V Stern Tube 200mm is listed as a Stern Tube Bearing within the Shaft Line Equipment category. It is typically installed along the propulsion shaft line between the engine or gearbox and propeller, including stern-tube and intermediate support positions. Its engineering role is to support, seal, align or transmit propulsion torque while maintaining controlled shaft motion through the hull. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Blohm+Voss first.
What our service work and the manufacturer documentation say about keeping this model running.
Trend bearing temperatures, vibration, lubricant condition and seal leakage and inspect foundations and accessible shaft surfaces. Check alignment indicators after major repair or grounding events as required by vessel procedures. Clearances, wear-down limits and alignment tolerances must be taken from class-approved and manufacturer documentation.
Carry approved seal elements, O-rings, bearing service parts, lubricant filters and maker-recommended monitoring sensors or fittings.
Free of charge — we forward your request to qualified suppliers for Blohm+Voss equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Blohm+Voss B+V Stern Tube 200mm — a part, a service call, a second opinion. Are you Blohm+Voss? Claim this brand page.
Service engineer? Write the day report for this B+V Stern Tube 200mm in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.