EHC-1000
EHC Teknik EHC-1000 is a fuel-oil homogenizing or conditioning unit listed in the supplied equipment record. It is normally installed in the vessel fuel-treatment or booster system upstream of the final engine or boiler fuel consumers. Its primary purpose is to condition fuel and reduce the size or concentration of agglomerated contaminants before downstream combustion equipment. Unlike a purifier, which separates contaminants from the fuel stream, a homogenizer mechanically conditions the fuel and therefore has a different maintenance focus on the working elements, drive and clearances. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect seals, bearings, coupling or drive, motor current trend, vibration and fuel leakage. Verify upstream strainers and downstream filters are not masking a process problem. Check automatic controls and protective trips. Internal wear dimensions and adjustment limits must be taken from the manufacturer documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →