"> DESMI DESMI DSL-100 Pumproom Cargo Pump
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 10 verified suppliers & service companies for DESMI in the Maritime Network Find suppliers →
DESMI

DESMI DSL-100 Pumproom Cargo Pump

DESMI DESMI DSL-100 Pumproom Cargo Pump is a shipboard unit in the Tanker Cargo Pumps group, classified in the source as Centrifugal Cargo Pump (Pumproom). It is normally installed in a cargo pump room with suction connections to cargo tanks and discharge to deck manifolds. Its primary duty is to transfer liquid cargo ashore or between tanks using a dedicated cargo pump. In service it interfaces with cargo suction/discharge piping, valves, drive turbine/electric motor, priming/stripping arrangements, monitoring and emergency shutdowns. The source record states capacity 100 m³/h and medium Crude oil / products for this exact variant; this information is retained unchanged and distinguishes it from neighboring entries in the same product family. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

100 m³/h
Capacity
Crude oil / products
Medium

Components & Design

Component data being added…

Technical Data

pump type centrifugal_pumproom
flow m3h 100
series DSL
head m 100

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Mechanical seal/packing leakage, typically indicated by cargo leakage, odor or pump-room alarm
Cavitation or suction restriction, typically indicated by noise, vibration and reduced cargo rate
Impeller/wear-ring erosion or corrosion, typically indicated by reduced head/capacity
Bearing or drive wear, typically indicated by vibration, overheating or abnormal noise
Control/ESD or remote valve fault, typically indicated by pump trip, inability to start or unsafe shutdown response

Service & Maintenance

Inspect seals, bearings, suction conditions, impeller/wear parts where accessible, drive system, vibration, remote controls and ESD functions; performance and wear limits require approved manufacturer data.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep seal/packing kits, bearings, gaskets, wear rings or impeller service parts, coupling items and critical control/ESD components.
Equipment Model #68858 · ✓ still in production