Reduction Gearbox · Propulsion Gearbox
The RENK MARHY 560 is a hybrid marine reduction gearbox that combines mechanical gearing with an integrated electric motor to provide high‑efficiency power transmission for large propulsion plants; source-listed capacity 5000-15000 kW. The supplied category identifies it as Reduction Gearbox, and it is normally installed between a propulsion engine or motor and the shaft line, reducing or adapting rotational speed and transmitting torque to the propeller. In that role, its primary purpose is to match prime-mover speed and torque to the propulsion shaft while providing the required clutching or reduction arrangement. Single-stage, multi-stage and epicyclic marine gearboxes differ in gear geometry and layout, but all depend on alignment, tooth contact, bearings and clean pressurized lubrication. Within the supplied list, this entry is distinguished from neighbouring variants by its model designation and the explicitly listed capacity; no further model-specific difference is stated in the source. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Renk first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect oil level and condition, filters, coolers, pumps, bearing temperatures, vibration, seals and alignment. Review magnetic plugs or oil-debris findings and investigate changes in gear noise. Check clutch or control response where applicable. Refer to the manufacturer documentation for the exact figure for backlash, tooth contact, oil pressure and bearing limits.
Carry filters, pump and valve service parts, seals, approved lubricants, clutch components where fitted, temperature or pressure sensors and critical bearing or fastening parts.
Free of charge — we forward your request to qualified suppliers for Renk equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Renk MARHY 560 — a part, a service call, a second opinion. Are you Renk? Claim this brand page.
Service engineer? Write the day report for this MARHY 560 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.