"> Yara Marine Yara Marine SOx Scrubber 5MW
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 155 verified suppliers & service companies for Yara Marine in the Maritime Network Find suppliers →
Yara Marine

Yara Marine SOx Scrubber 5MW

Yara Marine Yara Marine SOx Scrubber 5MW — Exhaust Gas Cleaning; source metadata also lists capacity 5 MW. The supplied category identifies the equipment as SOx Scrubber, and it is normally installed in the main or auxiliary engine exhaust path with treatment tower, pumps, water-treatment equipment, analyzers and control systems as applicable. In that listed role, its primary purpose is to reduce regulated exhaust-gas pollutants before discharge to atmosphere. Open-loop, closed-loop and other scrubber arrangements differ in wash-water handling, but all depend on gas-side flow, liquid circulation, monitoring and compliant discharge or residue handling. Within the supplied list, this variant is distinguished from neighbouring entries by its model designation and the explicitly listed capacity; further hardware differences are not stated in the source. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

5 MW
Capacity

Components & Design

Component data being added…

Technical Data

scrubber type hybrid
engine power mw 5
sox reduction pct 98

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Spray-nozzle or packing fouling reduces gas-liquid contact and causes poor emissions performance or rising pressure drop
Wash-water pump or circulation faults cause low flow and automatic system derating or shutdown
Analyzer or sensor contamination produces incorrect emissions, pH or process readings and compliance alarms
Scale, corrosion or solids buildup damages tower internals, piping or treatment equipment
Valve, dosing or control faults cause unstable chemistry, bypass conditions or failed operating sequence

Service & Maintenance

Inspect scrubber internals where accessible, wash-water pumps, spray nozzles, piping, analyzers, dosing or water-treatment equipment and drains. Trend emissions and process readings and review alarms and compliance records. Maintain residue handling and overboard control under the vessel's approved environmental procedure. Refer to the manufacturer and statutory documentation for the exact figure for emissions, chemistry, pressure and flow criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry pump and valve seals, spray nozzles, analyzer consumables, filters, dosing components, sensors and control relays.
Equipment Model #68414 · ✓ still in production