Plate Heat Exchanger · Heat Exchangers
Kelvion NX 50M is a marine plate heat exchanger in the Heat Exchangers / Plate Heat Exchanger category. Equipment of this class is typically installed in the machinery space as part of a cooling, heating, lubricating-oil, fuel, freshwater, or process circuit. Its shipboard purpose is to transfer heat between two fluid circuits without normally mixing the media. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the installed configuration. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect external leakage, corrosion, temperature difference, flow restriction, and evidence of cross-contamination. Trend inlet and outlet temperatures and differential pressure where instruments are fitted, clean heat-transfer surfaces using an approved method, and verify assembly against manufacturer documentation.
Keep the applicable gasket or seal set, connection seals, and any model-specific plate, tube, or fastening items recommended by the manufacturer.
Free of charge — send us your request for Kelvion equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Kelvion first.
Tell us what you need for this Kelvion NX 50M — a part, a service call, a second opinion. Are you Kelvion? Claim this brand page.
Service engineer? Write the day report for this NX 50M in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.