OceanSphereENGINES

NTU 50

Plate Heat Exchanger · Heat Exchangers

Technical data from manufacturer or class sources · not yet verified by a person​‌​​‍​⁠⁠⁠⁠‍‌​‌‍​‌​⁠‍
5 m² surfaceCapacity

GEA NTU 50 is a plate heat exchanger (Heat Exchangers / Plate Heat Exchanger). It is normally installed in the engine room within a cooling, heating or heat-recovery circuit. It is intended to transfer heat between two liquid circuits while keeping the media physically separated. In service it interfaces with hot- and cold-side piping, isolation valves, vents and drains, pumps and temperature instrumentation.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Exchanger typeplate
Surface area m25
Max. Pressure (bar)25
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect for external leakage, corrosion and evidence of cross-contamination, and trend inlet/outlet temperatures and pressure drop where instrumentation permits. During overhaul, keep plate order and orientation correct and examine plates, gaskets and frame condition. Exact tightening dimensions, plate limits and cleaning chemicals must follow manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry the correct gasket set, selected replacement plates if the vessel's spares policy requires them, frame hardware and approved cleaning materials for the installed plate material and service.

Need this part?

Request a quote for this model.

Free of charge — send us your request for GEA equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Plate Heat Exchanger.

Other models of the same equipment type, GEA first.

By manufacturer Alfa LavalGEASondexFunkeKelvionHisakaTranterVahterusAPVTwin DiscYorkKelvion PHE GmbHSWEP (Sweden)A.S.T.R.A. REFRIGERANTI S.r.l.PTG FrioNordica ASAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All GEA models More like GEA NTU 50
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this GEA NTU 50 — a part, a service call, a second opinion. Are you GEA? Claim this brand page.

Service engineer? Write the day report for this NTU 50 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.