GEA NTU 50
GEA GEA NTU 50 is a plate heat exchanger in the supplied category 'Heat Exchangers / Plate Heat Exchanger'. It is normally installed in the engine room within a cooling, heating or heat-recovery circuit. It is intended to transfer heat between two liquid circuits while keeping the media physically separated. Compared with neighbouring entries in the same series, the supplied data identifies this variant by a supplied capacity of 5 m² surface. In service it interfaces with hot- and cold-side piping, isolation valves, vents and drains, pumps and temperature instrumentation. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect for external leakage, corrosion and evidence of cross-contamination, and trend inlet/outlet temperatures and pressure drop where instrumentation permits. During overhaul, keep plate order and orientation correct and examine plates, gaskets and frame condition. Exact tightening dimensions, plate limits and cleaning chemicals must follow manufacturer documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →