OceanSphereENGINES
Library› Engine Room› Main Engines (2-Stroke)› Main Engine 2-Stroke› Hudong-Zhonghua 6S50ME-C8.5
Hudong-Zhonghua

6S50ME-C8.5

Main Engine 2-Stroke · Main Engines (2-Stroke)

Technical data from manufacturer or class sources · not yet verified by a person​‌​​‌⁠⁠‍​‌‍‍‌​​‍​‍‌​
9,960 kWPower
6Cylinders
500 mmBore
2,214 mmStroke

The Hudong‑Zhonghua 6S50ME-C8.5 is a low‑speed, six‑cylinder inline two‑stroke main engine featuring MAN‑licensed ME‑C electronic control for optimized fuel consumption and emissions.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Configurationinline
Speed (rpm)117
Fuel TypeHFO/VLSFO/MGO
TechnologyME-C Electronically Controlled (MAN license)
Displacement l per cyl434.7
Inspection

Inspector Detail ✓ verified

Common issues

  • Hydraulic Power Supply (HPS) Unit Faults: Issues with pumps, accumulators, filters, or control valves can lead to engine trips or derating, as ME-C engines rely heavily on hydraulics for valve actuation and fuel injection.
  • Exhaust Valve Actuator/Spindle Seizure or Leakage: High temperatures, corrosive fuels (HFO), and hydraulic system issues can lead to exhaust valve operational problems, affecting combustion and efficiency.
  • Fuel Valve Nozzle Clogging/Wear: Especially with varying fuel qualities (HFO/VLSFO/MGO), leading to poor atomization, incomplete combustion, high exhaust temperatures, and potential cylinder damage.
  • Cylinder Liner Scuffing/Excessive Wear: Inadequate cylinder lubrication, poor fuel combustion, abrasive particles, or cold corrosion can cause premature liner wear, leading to high lube oil consumption and blow-by.
  • Piston Ring Breakage/Sticking: Often a consequence of poor combustion, high temperatures, or liner wear, leading to loss of compression, blow-by, and increased lube oil consumption.
  • Engine Control System (ECS) Sensor/Actuator Failures: Being electronically controlled, faults in critical sensors (e.g., speed, temperature, pressure) or actuators can cause operational instability, alarms, or engine trips.
  • Scavenge Port Choking: Accumulation of carbon deposits and unburnt fuel residues in the scavenge ports, particularly with lower quality fuels or prolonged low-load operation, reducing scavenging efficiency and increasing thermal load.

Inspection checklist

  • Hydraulic Power Supply (HPS) Unit: Check for oil leaks, abnormal pump noise, pressure gauge stability, oil level and quality in the hydraulic tank. Verify filter differential pressures.
  • Cylinder Unit Visual & Operational Check: Observe indicator cocks for blow-by, check cylinder oil consumption records, and monitor individual cylinder exhaust gas temperatures for consistency.
  • Exhaust Gas System: Inspect exhaust valve cooling water/oil temperatures, look for signs of leaks around valve housings, and check turbocharger condition (bearings, air filter, compressor/turbine fouling).
  • Fuel Oil System: Inspect high-pressure fuel pipes for leaks (ensure shielding is intact), check fuel valve cooling system, and monitor fuel pressure/temperature at the engine inlet.
  • Scavenge Space Inspection: Open scavenge drain cocks and inspection doors (if safe) to check for carbon deposits, oil accumulation, and signs of water ingress. Assess cleanliness.
  • Engine Control System (ECS) & Alarms: Review alarm logs for recurring faults, verify critical sensor readings (temperatures, pressures, speeds) against expected values, and check actuator responses.
  • Lubricating Oil System: Check main and cylinder lube oil pressures and temperatures. Inspect main engine lube oil filters for differential pressure and signs of contamination. Review recent oil analysis reports.
  • Engine Foundation Bolts & Chocking: Visually inspect all accessible foundation bolts for tightness, signs of loosening, corrosion, or fretting. Check chocking for integrity.

Service intervals

Fuel Valves Overhaul3,000 - 6,000 hours (depending on fuel quality and operating conditions)
Exhaust Valve Overhaul6,000 - 12,000 hours (depending on fuel, operating conditions, and valve type)
Cylinder Liner Condition Check (via scavenge port)6,000 - 12,000 hours
Piston Overhaul (top ring land inspection/ring renewal)12,000 - 18,000 hours
Turbocharger Overhaul (bearings/cleaning)12,000 - 24,000 hours
Hydraulic Power Supply (HPS) Pump Overhaul12,000 - 18,000 hours
Main Bearing Inspection24,000 - 36,000 hours
Major Overhaul (Crankshaft/Connecting Rod Bearings, Piston withdrawal)36,000 - 48,000 hours

Typical wear limits

Cylinder Liner Wear (Max Taper/Ovality)0.6 - 0.8 mm (or 0.1% of bore diameter per 1000 hours, typically max 0.8% of bore)
Piston Ring Groove Wear (Axial Clearance)Max 0.2 - 0.3 mm beyond new specification
Exhaust Valve Seat Wear (Recession)Max 2 - 3 mm from new position (check maker's specific limits)
Main Bearing ClearanceMax 0.2 - 0.3 mm (check maker's specific limits)
Connecting Rod Bearing ClearanceMax 0.2 - 0.25 mm (check maker's specific limits)

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Fuel Valve Nozzle/Spindle Assembly (at least one per cylinder type)
  • Exhaust Valve Spindle/Seat Ring (at least one complete assembly)
  • Piston Rings (complete set for at least one cylinder)
  • Hydraulic Power Supply (HPS) Pump Cartridge/Elements (or complete spare pump)
  • Main Engine Control System (ECS) PLC/IO Modules (critical spares as per maker's recommendation)
  • High-Pressure Fuel Pipe (one complete length)
  • Cylinder Liner O-rings/Seals (complete set for one cylinder)
  • Turbocharger Bearing Cartridge (if applicable, or critical bearing components)

Safety

  • High-Pressure Fuel Oil Leaks: Risk of fire due to atomized fuel contacting hot surfaces. Ensure proper shielding and leak detection.
  • High-Pressure Hydraulic Oil Leaks: Can cause severe injection injuries and fire risk. Always depressurize before working on the HPS or actuators.
  • Hot Surfaces/Pipes: Exhaust manifold, turbocharger, steam pipes, and cooling water pipes pose severe burn risks. Ensure insulation is intact.
  • Rotating Machinery: Crankshaft, flywheel, turbocharger, and pumps present entanglement hazards. Ensure all guards are in place.
  • Scavenge Space Fires: Accumulation of oil and carbon deposits can ignite. Regular cleaning and monitoring are essential.
  • High Voltage Electrical Components: Within the ECS cabinets, power supply units, and motor starters. Ensure proper lockout/tagout procedures are followed.

Class survey

During annual, intermediate, and special surveys, the class surveyor will typically focus on: verification of safety devices and alarms (overspeed, low LO pressure, high CW temp, HPS pressure); inspection of engine foundation and chocking for integrity; crankshaft deflection readings (for alignment and bearing condition); scavenge space inspection for cleanliness and fire prevention; exhaust gas system integrity (manifold, turbocharger, spark arrestor); fuel oil system (high-pressure pipe shielding, leak detection, quick closing valves); and review of maintenance records, oil analysis reports, and spare parts inventory. For special surveys, opening of 25% of main and connecting rod bearings, and cylinder liner wear measurements are often required.

Estimated lifetime: 80,000 - 120,000 hours before major overhaul (e.g., crankshaft inspection, full piston withdrawal for all cylinders, main bearing renewal). With proper maintenance and component renewal, the engine structure itself can last 200,000+ hours.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Hudong-Zhonghua equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 2-Stroke.

Other models of the same equipment type, Hudong-Zhonghua first.

By manufacturer MAN Energy SolutionsWinGDSulzerWärtsiläMitsubishiElectro-Motive DieselHyundaiDoosanHudong-ZhonghuaJapan EngineAkasaka Diesel (Mitsubishi UEC licensed)National Railway EquipmentHSD EngineKawasakiProgress Rail Locomotive, Inc.All manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like 6S50ME-C8.5
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Hudong-Zhonghua 6S50ME-C8.5 — a part, a service call, a second opinion. Are you Hudong-Zhonghua? Claim this brand page.

Service engineer? Write the day report for this 6S50ME-C8.5 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.