OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Deck› Anchor & Mooring Equipment› Anchor Windlass› DMT Marine EAW-200

EAW-200

Anchor Windlass · Anchor & Mooring Equipment

Technical data from manufacturer or class sources · not yet verified by a person

The DMT Marine DMT-EAW-200 is an anchor windlass. It is normally installed on the forecastle near chain lockers and hawse pipes. It is designed for lowering, heaving and securing the anchor and cable. In operation, drive, cable lifter/wildcat, brake and clutch handle the anchor chain. Compared with neighbouring models, the relevant differences are chain size, pull, brake capacity, drive and optional mooring/warping functions; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on wildcat, brake, clutch, gearbox, bearings, drive, foundations, chain stoppers and cable. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Equipment Typewindlass
Drive Typeelectric
Pull capacity (kN)200
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect brakes, clutches, drum/warping end or wildcat, gearbox, bearings, drive, foundations, guards and local controls. Examine mooring lines or anchor cable and associated fairleads/chain stoppers. Test emergency stops and apply only approved brake/holding test procedures and values.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry brake/clutch service parts, bearings, coupling elements, hydraulic seals/hoses or selected electric-drive/control parts, limit switches and approved fasteners. Rope, wire or chain replacement items must match the vessel's certified arrangement.

Need this part?

Request a quote for this model.

Free of charge — send us your request for DMT Marine equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Anchor Windlass.

Other models of the same equipment type, DMT Marine first.

By manufacturer Data HidrolikMacGregorHatlapaRolls-RoyceKarmoy WinchBrattvaagCSSCTowimorMaxwell MarineDMT MarineBeihai MarineRapp MarineAdria WinchDMC MarineSEC MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All DMT Marine models More like DMT-EAW-200
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this DMT Marine EAW-200 — a part, a service call, a second opinion. Are you DMT Marine? Claim this brand page.

Service engineer? Write the day report for this EAW-200 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.