Liebherr Crane Around the Leg (COL)
The Liebherr crane around the leg (CAL) is designed as a heavy duty crane for offshore wind turbine installation. Specially designed as a crane around The Liebherr offshore crane CAL is designed especially for installation as a crane around the leg on jack-up vessels and enables a rotation of ±460°. It is deployed primarily for heavy lift construction and maintenance work. Specially designed as a crane around the leg, it facilitates space-saving positioning on the ship despite the size of the crane. The parallel jib makes it possible to park the jib over one of the ship's front legs. Positioning the crane in this way prevents blocking of the free area on deck, which can be used to load the ship. The CAL can be deployed as a heavy duty crane for the installation and maintenance of offshore wind turbines. At a maximum of 1,700 tonnes, the enormous lifting capacity of the crane facilitates the installation of turbines and rotors with more than five megawatts as well as loading and subsequent installation of heaviest foundations. Another area of use for the CAL is in setting-up equipment for oil and gas extraction. In this case, the crane can be used to build and dismantle platforms or other constructions.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visuelle Tagesinspektion nach ISO 4309:2017; Messschieber für Durchmesser; Magnetinduktive Prüfung (MRI) bei Verdacht auf Innenschäden; Inspektionspunkte: Trommelverankerung, Schlagende, Umlenkung über Rollen, beladene Seilabschnitte
Sichtprüfung auf Schmierflüssigkeitsleckage; Prüfung der Dichtungen auf Verschleiß und Verschmutzung; Vibrations- und Temperaturüberwachung; Überholung durch qualifizierte Liebherr Service mit spezialisierter Ausrüstung bei Bedarf
Drucktest (Pressure Test) gegen spezifizierte Solldrücke; Sichtprüfung auf Flüssigkeitsverluste; Ölprobenanalyse (Condition Monitoring); Funktionsprüfung aller Hubfunktionen (Heben, Schwenken, Luffing)
Visuelle Oberflächenprüfung auf Oberflächenrisse und Verformung; NDT-Prüfung (Röntgen/MRI) bei kritischen Haken für Innenschäden; Lasttest: ~25% über Nenntraglast durchführen; Überprüfung der Hakenverriegelung und Verschleißmarken
Oberflächenrost und -korrosion durch Sichtprüfung; NDT-Prüfung (Ultraschall, Röntgen) an kritischen Schweißstellen; Dimensional-Überprüfung geometrischer Toleranzen; Überholung durch Service Centre Steel mit Welding/Structural Analysis bei Bedarf
Visuelle Prüfung aller elektrischen Verbindungen auf Korrosion in Salzwasserumgebung; Funktionsprüfung der Überlastsicherung und Anzeigen; Durchgangsprüfung kritischer Schaltkreise; Lithiumspeicher/Batterie Zustandsprüfung bei elektro-hydraulischen Systemen
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →