OceanSphereENGINES
Library› Engine Room› Main Engines (2-Stroke)› Main Engine 2-Stroke› MAN Energy Solutions 7S70ME-LGIP9.6

7S70ME-LGIP9.6

Main Engine 2-Stroke · Main Engines (2-Stroke)

Technical data from manufacturer or class sources · not yet verified by a person​​‍‌‌‍​‍​‍​‍‌‍‌‌​⁠​⁠
56,560 kWPower
7Cylinders
700 mmBore
2,800 mmStroke
91 rpmMCR RPM

Unverified entry: we could not confirm this designation against a manufacturer source and cannot back it up. The page stays online for reference but is not offered to search engines.

The MAN 7S70ME-LGIP9.6 is a high‑power, low‑speed 2‑stroke main engine delivering 56 560 kW at 91 rpm, notable for its high‑pressure LPG injection and Tier III emissions compliance.

Inspection

Inspector Detail ✓ verified

Designation decoded

7-cylinder Super-Long-Stroke 700 mm bore ME-LGIP Dual-Fuel (LPG liquid injection) Mark 9.6 — two-stroke crosshead engine for VLGC propulsion with LPG direct injection at approx. 500–600 bar and pilot diesel ignition

Background

The 7S70ME-LGIP9.6 is the Super-Long-Stroke variant with 700 mm bore and 2800 mm stroke (S/B = 4.0). Higher rated speed than the G70 with a more compact stroke, suitable for VLGCs with direct propeller drive at moderate speeds. LPG liquid injection at 500–600 bar with pilot diesel ignition. 7-cylinder configuration with torsional vibration risk. LPG is heavier than air — low-level gas detectors are mandatory. Flash point −104 °C, LEL 2.1 %. BN 25–40 cylinder oil, cold corrosion monitoring required. With 700 mm bore, one of the most powerful engines in the ME-LGIP family.

Calculated metrics

Stroke to bore ratio4

Inspector checklist

Running gear & tribology
LPG injection system
LPG supply (double-walled system)
Safety (LOW-LEVEL detectors, EX protection, ventilation)
Electronic control

Logbook reference values

ParameterExpectedDeviation means
Cylinder oil feed rate (BN 25–40): Document ACC dosing
LPG injection pressure: 500–600 bar
Pilot diesel share: 3–8% in LPG mode
Cylinder liner wear: Trend according to MAN specifications
Exhaust gas temperature spread: <50 °C
Gas detector functional test: weekly
Compression pressures: cylinder-wise trend

Common Failure Modes

  • Cold corrosion of liners at BN 25–40 in LPG operation — liner surface of 700 mm bore
  • LPG injection valve erosion at 500–600 bar — high flow rates for 700 mm bore
  • Torsional vibrations with 7 cylinders — partial load and cylinder cut-off critical
  • LPG accumulation on the floor during leakage — large LPG volumes, UEG 2.1%
  • Crosshead bearing overload at high cylinder power

Expert tips

  • S70 with S/B 4.0 and 700 mm bore: despite moderate stroke-to-bore ratio, absolute forces and LPG quantities are significant — closely monitor injection valve tightness and liner wear
  • 7-cylinder torsion: Check torsional vibration damper at every class inspection, document barred speed ranges in the engine logbook
  • LPG safety for 700 mm bore engine: large LPG flow rates mean that even small leaks quickly create dangerous concentrations on the floor — verify detector response time and alarm delay

Related components

  • LPG fueling system and reliquefaction
  • Crankshaft torsional vibration damper
  • N₂ generator for inerting
  • ESD system and ventilation dampers
  • Exhaust gas aftertreatment and emissions monitoring
  • HPS (Hydraulic Power Supply)
  • Pilot diesel supply system
  • Engine foundation and alignment

Classification & regulatory

IGC Code and IGF Code. SOLAS II-2 Fire Protection. IMO MSC.391(95) Low-flashpoint Fuels. Classification society requirements for Dual-Fuel LPG VLGC. Flag state gas detection and EX zones. MAN ES Service Letters ME-LGIP Mk 9.6. IACS UR M68 Torsional Vibrations.

Reference content for inspector orientation. Always verify against manufacturer's manual, latest service letters and class society requirements.

Need this part?

Request a quote for this model.

Free of charge — send us your request for MAN Energy Solutions equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 2-Stroke.

Other models of the same equipment type, MAN Energy Solutions first.

By manufacturer MAN Energy SolutionsWinGDSulzerWärtsiläMitsubishiElectro-Motive DieselHyundaiDoosanHudong-ZhonghuaJapan EngineAkasaka Diesel (Mitsubishi UEC licensed)National Railway EquipmentHSD EngineKawasakiProgress Rail Locomotive, Inc.All manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All MAN Energy Solutions models More like 7S70ME-LGIP9.6
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this MAN Energy Solutions 7S70ME-LGIP9.6 — a part, a service call, a second opinion. Are you MAN Energy Solutions? Claim this brand page.

Service engineer? Write the day report for this 7S70ME-LGIP9.6 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.