OceanSphereENGINES

DC(M)-32(e)(F)(L)

Auxiliary Engine (Generator Set) · Auxiliary Engines

Technical data from manufacturer or class sources · not yet verified by a person​​‌‍​⁠‌⁠⁠‍‍‌‍​‌‌⁠‍⁠‍
HFO / VLSFO / MGOMedium
Daihatsu in the SpecCodex register — view brand page →

The Daihatsu DC(M)-32(e)(F)(L) is a medium‑speed, six‑cylinder auxiliary diesel engine delivering approximately 3 000 PS (2 206 kW) at 720 rpm, primarily used to drive ship service generators and other onboard auxiliaries.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

6DK-32 Rated Power3000 PS / 2206 kW @ 720 RPM (Skyline Ships verification)
Bore/Stroke Pattern320mm bore / 400mm stroke inferred but unverified for DK-32
Mean Effective Pressure (estimated)2.59 MPa (per DC-32e analogous design)
Piston Speed (estimated)9.6 m/sec @ 720 rpm
Design ClassMedium-speed marine auxiliary diesel engine
Fuel SystemMDO/HFO with fuel changeover capability
Cylinder Head AssemblyPressure-tested; requires assembly caution for intake/exhaust valves
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Servicing per the manufacturer's manual and classification society requirements. Annual inspection at class survey. Stock spare parts as specified by the manufacturer.

Inspection

Inspector Detail ✓ verified

Common issues

  • Fuel injection system malfunctions (clogged nozzles, worn pump elements, timing issues) leading to poor combustion, increased exhaust temperatures, and potential black smoke.
  • Cylinder liner wear exceeding limits, resulting in increased lube oil consumption, blow-by, and reduced compression.
  • Bearing wear (main, connecting rod, camshaft) due to lubrication issues, contamination, or extended running hours, potentially causing abnormal noises or vibrations.
  • Turbocharger fouling or bearing wear, leading to reduced engine efficiency, increased exhaust back pressure, and higher charge air temperatures.
  • Cooling system blockages or leaks (e.g., heat exchanger fouling, pipe corrosion, pump seal failure) causing engine overheating or inadequate temperature control.
  • Exhaust valve seat wear or burning, leading to compression loss, reduced power output, and increased exhaust gas temperatures for affected cylinders.
  • Control system sensor failures (e.g., temperature, pressure, speed) causing erratic operation, false alarms, or failure of safety shutdowns.
  • Corrosion of external components, piping, and electrical connections due to marine environment exposure, particularly in areas with poor ventilation or insulation.

Inspection checklist

  • Visual inspection for oil, fuel, water, or air leaks from engine block, piping, connections, and seals.
  • Check exhaust gas appearance (color, smoke density) and exhaust manifold integrity for leaks or hot spots.
  • Monitor engine parameters (lube oil pressure/temperature, cooling water pressure/temperature, exhaust gas temperatures per cylinder, turbocharger RPM, charge air pressure) against normal operating ranges and historical data.
  • Verify functionality of safety devices: overspeed trip, low lube oil pressure shutdown, high cooling water temperature shutdown, emergency stop, and local/remote alarm systems.
  • Inspect fuel oil system components (filters, pumps, heaters, injectors) for cleanliness, leaks, and proper operation, including fuel rack movement and linkage.
  • Check vibration levels and listen for unusual noises during operation, paying attention to engine mounts, coupling, and rotating components.
  • Examine cylinder head components (valve rotators, rocker arms, pushrods) for proper lubrication, excessive play, and signs of wear or damage.
  • Inspect engine foundation bolts for tightness, signs of movement, and corrosion.
  • Review engine logbook and maintenance records for adherence to service schedules, oil analysis reports, and previous defect rectifications.

Service intervals

Lube Oil & Filter Change250-500 running hours (or based on oil analysis results)
Fuel Filter Change250-500 running hours
Air Filter Cleaning/Replacement1000-2000 running hours
Fuel Injector Overhaul/Replacement6000-8000 running hours
Cylinder Head Overhaul (Valves, Seats, Springs)6000-12000 running hours
Fuel Injection Pump Overhaul6000-12000 running hours
Turbocharger Overhaul12000-18000 running hours
Major Overhaul (Pistons, Liners, Bearings, Crankshaft Inspection)18000-24000 running hours or 3-5 years

Typical wear limits

Cylinder Liner Wear (Max. Ovality/Taper)0.6 - 0.8 mm (total wear from new, measured at top ring reversal point)
Crankshaft DeflectionMax. 0.03 - 0.05 mm (measured between crank webs, specific values vary by engine type and cylinder configuration)
Main Bearing Clearance0.15 - 0.25 mm (check against manufacturer's specific values, measured with lead wire or feeler gauges)
Connecting Rod Bearing Clearance0.15 - 0.25 mm (check against manufacturer's specific values, measured with lead wire or feeler gauges)
Piston Ring Groove WearMax. 0.15 - 0.20 mm (axial clearance increase for top ring groove)
Exhaust Valve Seat RecessionMax. 1.0 - 1.5 mm (from original position, indicating need for seat grinding or replacement)

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Full set of fuel oil filters (primary & secondary)
  • Full set of lube oil filters
  • Fuel injector nozzles (at least one set per cylinder)
  • Assorted O-rings and gaskets (especially for fuel, lube oil, and cooling water systems, cylinder head)
  • Main and connecting rod bearing shells (at least one set for critical cylinders)
  • Starting air valve components (e.g., springs, seals, pilot valve)
  • Critical sensors (e.g., speed sensor, pressure/temperature sensors for lube oil, cooling water, exhaust gas)
  • Fuses and relays for control and safety systems, and a spare electronic control unit (ECU) if applicable.

Safety

  • High-pressure fuel lines: Risk of spray fires from leaks. Ensure proper shielding, double-wall piping (if fitted), and leak detection systems are functional.
  • Hot surfaces: Exhaust manifold, turbocharger, engine block. Risk of severe burns. Ensure insulation and lagging are intact and free from oil/fuel contamination.
  • Rotating machinery: Flywheel, coupling, shafting, fan belts. Risk of entanglement. Ensure all guards are securely in place.
  • Overspeed protection: Critical for preventing catastrophic engine failure. Must be tested regularly as per manufacturer and class requirements.
  • Emergency stop functionality: Ensure immediate and reliable shutdown from all designated local and remote locations (e.g., engine room entrance, bridge).

Class survey

Class surveyors will conduct an annual inspection, reviewing engine logbooks, maintenance records, and oil analysis reports to confirm adherence to planned maintenance. They will verify operational parameters, conduct visual inspections for leaks, corrosion, general cleanliness, and structural integrity of the engine and its foundation. Critical safety devices (overspeed trip, emergency stops, low lube oil pressure/high temperature alarms/shutdowns) will be witnessed and tested. The integrity of the exhaust system, fuel oil system, and cooling system will be checked. Availability of critical spare parts as per class requirements will be confirmed, and any outstanding deficiencies or recommendations from previous surveys will be followed up.

Estimated lifetime: 80,000 - 120,000+ hours (assuming diligent maintenance, adherence to service intervals, and timely major overhauls)

Spares

Replacement Parts

Spare parts notes

Spare parts via Daihatsu Diesel Mfg. Co., Ltd. Moriyama Division or authorised distribution partners. Lead time: 2-6 weeks.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateTAM00000VU
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Daihatsu equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Auxiliary Engine (Generator Set).

Other models of the same equipment type, Daihatsu first.

By manufacturer CaterpillarMAN Energy SolutionsWärtsiläVolvo PentaScaniaMaK (Caterpillar)CumminsDeerePerkinsDaihatsuHanshinMTUYanmarBaudouinDeutzAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Daihatsu models More like DC(M)-32(e)(F)(L)
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Daihatsu DC(M)-32(e)(F)(L) — a part, a service call, a second opinion. Are you Daihatsu? Claim this brand page.

Service engineer? Write the day report for this DC(M)-32(e)(F)(L) in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.