OceanSphereENGINES

DC(M)-32(e)(F)(L)

Silnik pomocniczy (zespół prądotwórczy) · Silniki pomocnicze

Dane techniczne ze źródeł producenta lub towarzystwa · jeszcze niesprawdzone ręcznie​​‌‍​⁠‌⁠⁠‍‍‌‍​‌‌⁠‍⁠‍
HFO / VLSFO / MGOMedium
Daihatsu w rejestrze SpecCodex — przejdź do strony marki →

The Daihatsu DC(M)-32(e)(F)(L) is a medium‑speed, six‑cylinder auxiliary diesel engine delivering approximately 3 000 PS (2 206 kW) at 720 rpm, primarily used to drive ship service generators and other onboard auxiliaries.

Dane techniczne

Dane techniczne.dane referencyjne — niezweryfikowane

Masz kartę katalogową producenta dla tego modelu? Wyślij ją razem z formularzem zapytania — sprawdzimy ją i podamy źródło.

6DK-32 Rated Power3000 PS / 2206 kW @ 720 RPM (Skyline Ships verification)
Bore/Stroke Pattern320mm bore / 400mm stroke inferred but unverified for DK-32
Mean Effective Pressure (estimated)2.59 MPa (per DC-32e analogous design)
Piston Speed (estimated)9.6 m/sec @ 720 rpm
Design ClassMedium-speed marine auxiliary diesel engine
Fuel SystemMDO/HFO with fuel changeover capability
Cylinder Head AssemblyPressure-tested; requires assembly caution for intake/exhaust valves
Serwis

Uwagi serwisowe.

Co nasza praca serwisowa i dokumentacja producenta mówią o utrzymaniu tego modelu w ruchu.

Servicing per the manufacturer's manual and classification society requirements. Annual inspection at class survey. Stock spare parts as specified by the manufacturer.

Inspekcja

Szczegóły inspektora ✓ zweryfikowane

Typowe problemy

  • Fuel injection system malfunctions (clogged nozzles, worn pump elements, timing issues) leading to poor combustion, increased exhaust temperatures, and potential black smoke.
  • Cylinder liner wear exceeding limits, resulting in increased lube oil consumption, blow-by, and reduced compression.
  • Bearing wear (main, connecting rod, camshaft) due to lubrication issues, contamination, or extended running hours, potentially causing abnormal noises or vibrations.
  • Turbocharger fouling or bearing wear, leading to reduced engine efficiency, increased exhaust back pressure, and higher charge air temperatures.
  • Cooling system blockages or leaks (e.g., heat exchanger fouling, pipe corrosion, pump seal failure) causing engine overheating or inadequate temperature control.
  • Exhaust valve seat wear or burning, leading to compression loss, reduced power output, and increased exhaust gas temperatures for affected cylinders.
  • Control system sensor failures (e.g., temperature, pressure, speed) causing erratic operation, false alarms, or failure of safety shutdowns.
  • Corrosion of external components, piping, and electrical connections due to marine environment exposure, particularly in areas with poor ventilation or insulation.

Lista kontrolna przeglądu

  • Visual inspection for oil, fuel, water, or air leaks from engine block, piping, connections, and seals.
  • Check exhaust gas appearance (color, smoke density) and exhaust manifold integrity for leaks or hot spots.
  • Monitor engine parameters (lube oil pressure/temperature, cooling water pressure/temperature, exhaust gas temperatures per cylinder, turbocharger RPM, charge air pressure) against normal operating ranges and historical data.
  • Verify functionality of safety devices: overspeed trip, low lube oil pressure shutdown, high cooling water temperature shutdown, emergency stop, and local/remote alarm systems.
  • Inspect fuel oil system components (filters, pumps, heaters, injectors) for cleanliness, leaks, and proper operation, including fuel rack movement and linkage.
  • Check vibration levels and listen for unusual noises during operation, paying attention to engine mounts, coupling, and rotating components.
  • Examine cylinder head components (valve rotators, rocker arms, pushrods) for proper lubrication, excessive play, and signs of wear or damage.
  • Inspect engine foundation bolts for tightness, signs of movement, and corrosion.
  • Review engine logbook and maintenance records for adherence to service schedules, oil analysis reports, and previous defect rectifications.

Interwały serwisowe

Lube Oil & Filter Change250-500 running hours (or based on oil analysis results)
Fuel Filter Change250-500 running hours
Air Filter Cleaning/Replacement1000-2000 running hours
Fuel Injector Overhaul/Replacement6000-8000 running hours
Cylinder Head Overhaul (Valves, Seats, Springs)6000-12000 running hours
Fuel Injection Pump Overhaul6000-12000 running hours
Turbocharger Overhaul12000-18000 running hours
Major Overhaul (Pistons, Liners, Bearings, Crankshaft Inspection)18000-24000 running hours or 3-5 years

Typowe granice zużycia

Cylinder Liner Wear (Max. Ovality/Taper)0.6 - 0.8 mm (total wear from new, measured at top ring reversal point)
Crankshaft DeflectionMax. 0.03 - 0.05 mm (measured between crank webs, specific values vary by engine type and cylinder configuration)
Main Bearing Clearance0.15 - 0.25 mm (check against manufacturer's specific values, measured with lead wire or feeler gauges)
Connecting Rod Bearing Clearance0.15 - 0.25 mm (check against manufacturer's specific values, measured with lead wire or feeler gauges)
Piston Ring Groove WearMax. 0.15 - 0.20 mm (axial clearance increase for top ring groove)
Exhaust Valve Seat RecessionMax. 1.0 - 1.5 mm (from original position, indicating need for seat grinding or replacement)

Zakresy są typowe dla tej klasy konstrukcyjnej. Decydujące są zawsze dokumenty producenta dla danego numeru seryjnego.

Krytyczne części zamienne

  • Full set of fuel oil filters (primary & secondary)
  • Full set of lube oil filters
  • Fuel injector nozzles (at least one set per cylinder)
  • Assorted O-rings and gaskets (especially for fuel, lube oil, and cooling water systems, cylinder head)
  • Main and connecting rod bearing shells (at least one set for critical cylinders)
  • Starting air valve components (e.g., springs, seals, pilot valve)
  • Critical sensors (e.g., speed sensor, pressure/temperature sensors for lube oil, cooling water, exhaust gas)
  • Fuses and relays for control and safety systems, and a spare electronic control unit (ECU) if applicable.

Bezpieczeństwo

  • High-pressure fuel lines: Risk of spray fires from leaks. Ensure proper shielding, double-wall piping (if fitted), and leak detection systems are functional.
  • Hot surfaces: Exhaust manifold, turbocharger, engine block. Risk of severe burns. Ensure insulation and lagging are intact and free from oil/fuel contamination.
  • Rotating machinery: Flywheel, coupling, shafting, fan belts. Risk of entanglement. Ensure all guards are securely in place.
  • Overspeed protection: Critical for preventing catastrophic engine failure. Must be tested regularly as per manufacturer and class requirements.
  • Emergency stop functionality: Ensure immediate and reliable shutdown from all designated local and remote locations (e.g., engine room entrance, bridge).

Przegląd klasyfikacyjny

Class surveyors will conduct an annual inspection, reviewing engine logbooks, maintenance records, and oil analysis reports to confirm adherence to planned maintenance. They will verify operational parameters, conduct visual inspections for leaks, corrosion, general cleanliness, and structural integrity of the engine and its foundation. Critical safety devices (overspeed trip, emergency stops, low lube oil pressure/high temperature alarms/shutdowns) will be witnessed and tested. The integrity of the exhaust system, fuel oil system, and cooling system will be checked. Availability of critical spare parts as per class requirements will be confirmed, and any outstanding deficiencies or recommendations from previous surveys will be followed up.

Szacowana trwałość: 80,000 - 120,000+ hours (assuming diligent maintenance, adherence to service intervals, and timely major overhauls)

Części zamienne

Części zamienne

Uwagi o częściach zamiennych

Spare parts via Daihatsu Diesel Mfg. Co., Ltd. Moriyama Division or authorised distribution partners. Lead time: 2-6 weeks.

Klasyfikacja

Zatwierdzenie typu DNV

Wpisany do DNV Approval Finder według stanu z dnia naszego zapisu. Certyfikat wydaje DNV, nie my; aktualny status należy sprawdzić w DNV.

CertyfikatTAM00000VU
Otwórz certyfikat w DNV
Potrzebujesz tej części?

Zapytaj o ofertę na ten model.

Bezpłatnie — wyślij zapytanie dotyczące sprzętu Daihatsu. Nasz zespół je sprawdzi i odpowie e-mailem.

W przypadku sprzętu okrętowego prawie żaden producent ani autoryzowany dystrybutor nie podaje ceny, dopóki statek jest nieznany. Z danymi statku dostępność i cenę da się ustalić szybciej; bez nich być może musimy najpierw dopytać, co kosztuje kilka dni. Jeśli nie wolno Ci podać statku, wystarczy zdjęcie tabliczki znamionowej — dołącz je poniżej lub odeślij w odpowiedzi na nasz e-mail potwierdzający.

Twoje dane kontaktowe nie są publikowane. Konto nie jest wymagane.
Powiązane modeli

Także w Silnik pomocniczy (zespół prądotwórczy).

Inne modele tego samego typu sprzętu, najpierw Daihatsu.

Według producenta CaterpillarMAN Energy SolutionsWärtsiläVolvo PentaScaniaMaK (Caterpillar)CumminsDeerePerkinsDaihatsuHanshinMTUYanmarBaudouinDeutzWszyscy producenciCzęści według urządzeńNowy użytkownik? Załóż darmowe konto Nieczytelna tabliczka? Wypróbuj skaner tabliczek Wszystkie modele Daihatsu Podobne do DC(M)-32(e)(F)(L)
Więcej, niż pokazuje karta katalogowa

Odpowiadamy e-mailem, nigdy automatem.

Powiedz nam, czego potrzebujesz do tego Daihatsu DC(M)-32(e)(F)(L) — części, wizyty serwisowej, drugiej opinii. Czy jesteś Daihatsu? Przejmij tę stronę marki.

Serwisant? Napisz raport dzienny dla tego DC(M)-32(e)(F)(L) w OceanSphere Work — zdjęcia, godziny i części, jako PDF dla armatora. Wypróbuj 14 dni za darmo →

Często pytane

Pytania, które pojawiają się przy tym sprzęcie.

Czy dane tego modelu są bezpłatne?

Tak. Dane techniczne, dokumenty i uwagi serwisowe tego modelu są dostępne bez konta. Konto dodaje zapisane wyszukiwania i zapytania, niczego nie odbiera.

Czy znajdziecie część dokładnie do tego modelu?

Tak. Podaj producenta, model i czego potrzebujesz — każde zapytanie czyta człowiek i odpowiada e-mailem.

Dane techniczne wydają się błędne — co teraz?

Wyślij nam tabliczkę lub prawidłową wartość. Sprawdzimy ją w karcie danych producenta lub rejestrze towarzystwa klasyfikacyjnego i zaktualizujemy stronę.