General Lashing Equipment · Cargo Lashing & Container Equipment
The Welding Cone Type 12 is a weld-on conical fitting for general lashing and container securing, fixed to the deck, hatch cover or cargo foundation to locate and hold container corner castings or loose lashing fittings. It is classified as General Lashing Equipment and is a passive steel component without moving parts. Its job is to take horizontal locating loads and provide a defined, welded connection point for the cargo securing arrangement.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect cones visually for cracking at the weld, deformation of the cone head and coating damage during lashing gear inspections, and apply NDT to suspect welds. Cones that are bent, worn or cracked are cut out and re-welded by an approved welder under class supervision.
Carry a small stock of replacement welding cones with matching weld consumables, plus touch-up coating for repaired areas. Spare cones are only useful if a certified welder and class-approved repair procedure are available.
Free of charge — send us your request for MacGregor Finland Oy equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, MacGregor Finland Oy first.
Tell us what you need for this MacGregor Finland Oy Welding cone Type 12 — a part, a service call, a second opinion. Are you MacGregor Finland Oy? Claim this brand page.
Service engineer? Write the day report for this Welding cone Type 12 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.