OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Exhaust Gas Cleaning› SOx Scrubber› Kangrim Heavy Industries Co.,Ltd. Open Loop EGC system installed onboard Theseus (IMO 9728954)
Kangrim Heavy Industries Co.,Ltd.

Open Loop EGC system installed onboard Theseus (IMO 9728954)

SOx Scrubber · Exhaust Gas Cleaning

Technical data from manufacturer or class sources · not yet verified by a person
Per engine exhaust volumeCapacity
Exhaust Gas TreatmentMedium

An Open Loop EGC system installed onboard Theseus (IMO 9728954) falls under the category of Exhaust Gas Treatment equipment. Manufactured by Kangrim Heavy Industries Co., Ltd., this system is officially IMO-approved and carries the model number MEDG00000ZF, which has been verified through dnv-approval-finder. Common failures include internal corrosion in the scrubber wash tower, overloading of the water treatment system, drift in the pH sensor calibration, and exceedance of emission limits under high load conditions. Spare parts must be obtained directly from the manufacturer with a lead time of 4 to 8 weeks, including gas detection sensors. Regular maintenance involves an annual internal scrubber tower inspection, monthly pH sensor calibration, adherence to MEPC wash water analysis requirements, and continuous emissions monitoring.

Specifications

Technical data.

IMO ApprovedYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Internal scrubber tower inspection annually. pH sensor calibration monthly. Wash water analysis per MEPC requirements. Continuous emissions monitoring.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Kangrim Heavy Industries Co.,Ltd.: Special parts through the manufacturer. Lead time: 4-8 weeks. Gas detection sensors on board.

Classification

DNV type approval

Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.

CertificateMEDG00000ZF
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Kangrim Heavy Industries Co.,Ltd. equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in SOx Scrubber.

Other models of the same equipment type, Kangrim Heavy Industries Co.,Ltd. first.

By manufacturer Wärtsilä Moss ASLangh TechME Production A/SYara MarineEcospray Technologies S.r.l.Hyundai Heavy Industries Power Systems Co., Ltd.PANASIAZHEJIANG ENERGY MARINE ENVIRONMENTAL TECHNOLOGY CO.,LTDYara Marine Technologies ABAndritz MarineHI AIR KOREA Co., Ltd.Pacific Green MarineAlfa LavalMitsubishi Heavy Industries, Ltd.Clean Marine ASAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Open Loop EGC system installed onboard Theseus (IMO 9728954)
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Kangrim Heavy Industries Co.,Ltd. Open Loop EGC system installed onboard Theseus (IMO 9728954) — a part, a service call, a second opinion. Are you Kangrim Heavy Industries Co.,Ltd.? Claim this brand page.

Service engineer? Write the day report for this Open Loop EGC system installed onboard Theseus (IMO 9728954) in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.