Sterndrive / Inboard Engine (Petrol/SI) · Shaft Line & Propulsion
Tennessee Propulsion Products KINDM06.2FBE is identified in the source list as a petrol spark-ignition sterndrive or inboard marine engine with a stated power of 297.0 kW. Unlike an outboard engine, this equipment class is installed inside the hull and transmits power to a sterndrive, marine transmission, shaft system or other project-specific propulsion arrangement. It is normally located in an engine compartment where access, ventilation, cooling-water supply, exhaust routing and fire protection are integral parts of the vessel installation. Its purpose is to provide primary propulsion while allowing the propulsion drive and hull installation to be selected separately from the basic engine package. Within the neighboring entries in this dataset, this unit is distinguished by the exact manufacturer family or model code KINDM06.2FBE and the stated 297.0 kW rating. The source does not provide displacement, cylinder arrangement, aspiration, drive ratio, cooling configuration or service limits for this exact code, so those model-specific values must be confirmed from Tennessee Propulsion Products documentation and the vessel installation records.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Tennessee Propulsion Products first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the engine mounts, fuel system, ignition and electrical wiring, cooling circuit, exhaust system and propulsion coupling for leakage, corrosion, looseness and deterioration. Verify that ventilation and bilge arrangements around the petrol engine are clear and serviceable and investigate any fuel odor before operation. Check cooling-water flow and temperatures and inspect seawater-side components for blockage or leakage. Examine the sterndrive, transmission or coupling arrangement applicable to the vessel for lubricant leakage, abnormal play, corrosion and alignment concerns. Use the exact engine family or model code and serial number when selecting service information or spares. Service intervals, adjustment values, ignition settings, fluid specifications and wear limits must be taken from the manufacturer documentation for the exact engine and drive installation.
Typical support items may include correct spark plugs, fuel and oil filters where fitted, belts, fuses, approved lubricants, cooling-system service parts, hose clamps and selected ignition or sensor components appropriate to the installed engine. Drive-specific seals, anodes, lubricants and service parts should be selected separately for the actual sterndrive or transmission. Exact part numbers must be verified against the engine and drive serial numbers and the manufacturer parts catalogues.
Free of charge — we forward your request to qualified suppliers for Tennessee Propulsion Products equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Tennessee Propulsion Products KINDM06.2FBE — a part, a service call, a second opinion. Are you Tennessee Propulsion Products? Claim this brand page.
Service engineer? Write the day report for this KINDM06.2FBE in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.