Plate Heat Exchanger · Heat Exchangers
The Alfa Laval S.p.A. AC230-MAX is a brazed plate heat exchanger in the Alfa Laval AC family for compact heating, cooling and refrigeration duties. It consists of a sealed plate pack in which corrugated metal plates create alternating flow channels for the two media while brazed joints provide structural integrity and separation between the circuits. On board a vessel, units of this type can be installed in refrigeration plants, air-conditioning systems, chillers, heat pumps, oil or water cooling circuits and other packaged thermal systems. In refrigerant service, the selected unit may operate as an evaporator, condenser, economizer or subcooler depending on the system design. The MAX suffix identifies a distinct catalogue configuration within this model family; exact differences in plate arrangement, connection layout, pressure rating and capacity must be confirmed from the manufacturer documentation. Because the plate pack is permanently brazed and is not routinely opened like a gasketed plate heat exchanger, fluid cleanliness, correct flow conditions and suitable chemical cleaning practice are especially important.
What our service work and the manufacturer documentation say about keeping this model running.
Monitor inlet and outlet temperatures, pressures and pressure drop for gradual loss of performance. Maintain upstream strainers and fluid quality because internal mechanical access is limited. Check all external connections and the plate-pack perimeter for leakage, corrosion and vibration damage. Ensure connected piping is adequately supported so that excessive loads are not transferred into the exchanger. In evaporator duties, verify freeze protection, minimum-flow safeguards and refrigerant controls. If chemical cleaning is required, use only methods and agents compatible with the exchanger materials and follow manufacturer instructions.
For critical duties, a complete replacement brazed plate heat exchanger may be more practical than internal spare parts because the plate pack is normally not dismantled. Useful associated spares include connection seals where applicable, strainers or strainer elements, temperature and pressure sensors, control-valve service parts and refrigeration-system control components. Spare strategy should reflect system redundancy and the vessel's trading pattern.
Free of charge — send us your request for Alfa Laval S.p.A. equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Alfa Laval S.p.A. first.
Tell us what you need for this Alfa Laval S.p.A. AC230-MAX — a part, a service call, a second opinion. Are you Alfa Laval S.p.A.? Claim this brand page.
Service engineer? Write the day report for this AC230-MAX in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.