"> Alfa Laval S.p.A. MAB-209-LubeOil
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 80 verified suppliers & service companies for Alfa Laval S.p.A. in the Maritime Network Find suppliers →
Is Alfa Laval S.p.A. your company? Claim this page
Alfa Laval S.p.A.

MAB-209-LubeOil

The Alfa Laval S.p.A. MAB-209-LubeOil is a solids-retaining disc-stack separator applied to lubricating-oil cleaning. It is normally connected to a main-engine, auxiliary-engine, turbine or machinery lubricating-oil system through a dedicated treatment loop or settling arrangement. Centrifugal separation removes suspended solids and, when the bowl is arranged for purification, free water from the lubricating oil. Continuous or periodic cleaning reduces the contaminant load carried back to bearings, journals and other lubricated machinery components. The MAB family is designed for manual removal of accumulated sludge and can be arranged for clarification or purification. The MAB-209-LubeOil is identified in the library specifically for lubricating-oil duty, so its process setup should not be assumed to match a fuel-oil variant with the same basic separator designation. Exact oil compatibility, capacity, temperature, bowl setup and maintenance limits must be confirmed in the manufacturer documentation.

Alfa Laval S.p.A. MAB-209-LubeOil

Components & Design

Component data being added…

Technical Data

Model number MAB-209-LubeOil
Capacity (HFO) 9000 l/h
Capacity (lube oil) 7200 l/h
Bowl diameter 420 mm
Motor power 15.0 kW
Application main fuel/lube separator, optimised for lubricating oil cleaning
Drive type Direct / gear-driven
Bowl type Solids-retaining disc-stack
Fuel type optimised Lube oil
Capacity (at optimum fuel) 7200 l/h

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Sludge, carbonaceous material or wear debris accumulating in the bowl or disc stack, producing declining oil cleanliness, restriction or vibration
●Water entering the lubricating-oil system faster than it can be separated, producing cloudy oil or persistent downstream water contamination
●Incorrect bowl assembly or separation setup after cleaning, producing ineffective purification or unstable outlet behaviour
●Worn spindle, bearings or drive components, producing vibration, abnormal mechanical noise or unstable running
●Failed seals, blocked passages or operating-water/discharge faults where fitted, producing oil leakage, cross-flow or incomplete separation

Service & Maintenance

Inspect retained sludge for abnormal metallic particles or other debris that may indicate wear elsewhere in the machinery system. Clean the bowl, disc stack and passages and check for corrosion, erosion or damage. Verify bowl assembly, spindle condition, bearings, drive components, seals and any discharge or operating-water system fitted to the separator. Check cleaned-oil condition and separator vibration after reassembly. Use the exact manufacturer manual for wear limits, service intervals, assembly values and operating settings.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep the correct serial-number-specific service kit, especially seals and O-rings disturbed during bowl servicing. Additional onboard stock may include selected bearings, drive items, bowl seals and control or discharge components where fitted. Separate and identify spares for similar-looking fuel-oil and lube-oil separators unless interchangeability is confirmed by Alfa Laval documentation.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Alfa Laval S.p.A.?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #153202 · ✓ still in production