Bergen B33:45L Generating Set

Check coolant system: inspect hoses, clamps, heat exchangers, and expansion tank levels; verify coolant temperature and pressure are within rated limits

Lubrication oil analysis and oil pressure check: sample oil for metal contamination, verify oil pressure at rated RPM, inspect oil filters and separators

Fuel system inspection: check fuel filters, injectors (spray pattern and condition), high-pressure fuel lines for leaks, and fuel quality/cleanliness

Turbocharger inspection: check turbine and compressor for fouling, bearing wear, and oil leaks; verify boost pressure matches manufacturer specifications

Exhaust system check: inspect manifolds and exhaust pipes for cracks or leaks; verify back-pressure is within limits; check SCR/catalyst condition where fitted

Generator and electrical system: inspect alternator windings insulation resistance, check exciter and AVR settings, verify switchgear and circuit breaker condition

Governor and speed control system: verify governor response under load steps, check actuator linkages, and confirm overspeed trip function

Structural and mounting inspection: check engine mounts and anti-vibration elements for deterioration, inspect foundation bolts for correct torque, and verify alignment between engine and generator shaft