OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 123 verified suppliers & service companies for Cummins in the Maritime Network Find suppliers →
Cummins

Onan Marine QD 40-65 kW — MDDCA/MDDCB/MDDCC (60 Hz)

Cummins Onan Marine QD 40-65 kW — MDDCA/MDDCB/MDDCC (60 Hz) — Commercial and large yacht marine auxiliary generator set.

Components & Design

Component data being added…

Technical Data

power kW 40 kW (MDDCA) / 55 kW (MDDCB) / 65 kW (MDDCC) at 60 Hz
speed rpm 1800 rpm

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Engine oil level and oil condition check (viscosity, contamination, change intervals per manufacturer schedule)

Engine oil level and oil condition check (viscosity, contamination, change intervals per manufacturer schedule)

Raw water / seawater strainer and impeller inspection (zinc anodes, impeller wear, corrosion on heat exchanger)

Raw water / seawater strainer and impeller inspection (zinc anodes, impeller wear, corrosion on heat exchanger)

Coolant level, concentration, and heat exchanger / keel cooler condition check

Coolant level, concentration, and heat exchanger / keel cooler condition check

Fuel system inspection: water separator/filter element condition, fuel quality, injector leak check

Fuel system inspection: water separator/filter element condition, fuel quality, injector leak check

Alternator output voltage, frequency stability, and load-bank test (no-load to rated load, AVR function)

Alternator output voltage, frequency stability, and load-bank test (no-load to rated load, AVR function)

Drive belt tension, condition, and alignment on all auxiliary drives (alternator, water pump)

Drive belt tension, condition, and alignment on all auxiliary drives (alternator, water pump)

Exhaust system integrity: wet exhaust water injection, back-pressure, hose and waterlock condition

Exhaust system integrity: wet exhaust water injection, back-pressure, hose and waterlock condition

Battery condition and charge state; starter motor and shore-power/automatic start circuit function test

Battery condition and charge state; starter motor and shore-power/automatic start circuit function test

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #152907 · ✓ still in production