OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is Casals Ventilació your company? Claim this page
Casals Ventilació

HBA

Casals Ventilació HBA — Marine/offshore wall-mounted axial fan for air renewal; cast aluminium impeller variant of HB series. Recommended for marine environments by Casals. Circular reinforced frame, polyester powder coat, modular motor-impeller assembly. Optional stainless steel or galvanised housing..

Components & Design

Component data being added…

Technical Data

impeller Cast aluminium, variable pitch angle
motor protection IP55, Class F
max temp single phase C 50
max temp three phase C 60
example model max airflow m3h 8140

Related equipment 10

Casals Ventilació HB same series Casals Ventilació HC same series Casals Ventilació HCA same series Casals Ventilació HM same series Casals Ventilació HMA same series Heinen & Hopman AXC Duct Fans alternative TF Marine AXF 450/2 alternative TF Marine AXF series alternative CEM elettromeccanica srl Axial Fan 24V 0.37kW FRR (Osculati ref. OSC-16.103.07) alternative CEM elettromeccanica srl Axial Fan 24V 300W FP (Osculati ref. OSC-16.103.04) alternative

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Inspect impeller blades for corrosion, erosion, cracks, and fouling deposits; verify variable pitch angle setting matches design specification

Inspect impeller blades for corrosion, erosion, cracks, and fouling deposits; verify variable pitch angle setting matches design specification

Check motor bearings for unusual noise, vibration, and temperature; re-lubricate or replace per manufacturer schedule

Check motor bearings for unusual noise, vibration, and temperature; re-lubricate or replace per manufacturer schedule

Inspect casing, frame, and bolted joints for corrosion pitting, especially in way of salt-water spray zones; verify anti-corrosion coating (C5M / SS316) integri

Inspect casing, frame, and bolted joints for corrosion pitting, especially in way of salt-water spray zones; verify anti-corrosion coating (C5M / SS316) integrity

Verify motor insulation resistance (megger test) and check IP55 seal condition on cable glands and terminal box

Verify motor insulation resistance (megger test) and check IP55 seal condition on cable glands and terminal box

Confirm airflow volume and direction (check for reversed impeller rotation or blade pitch drift); compare against commissioning baseline

Confirm airflow volume and direction (check for reversed impeller rotation or blade pitch drift); compare against commissioning baseline

Inspect and clean drainage holes and condensate paths within the casing to prevent water accumulation

Inspect and clean drainage holes and condensate paths within the casing to prevent water accumulation

Check vibration levels against ISO 14694 limits; inspect anti-vibration mounts for deterioration or fatigue

Check vibration levels against ISO 14694 limits; inspect anti-vibration mounts for deterioration or fatigue

Test any ATEX certification label, earthing continuity, and explosion-proof enclosure integrity where fitted in hazardous zones

Test any ATEX certification label, earthing continuity, and explosion-proof enclosure integrity where fitted in hazardous zones

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Casals Ventilació?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #152592 · ✓ still in production

Need spare parts for this model?

Tell us what you need for this model — we obtain the quotations for you.

Request spare parts for Casals Ventilació HBA → Find suppliers & service for Casals Ventilació →
Maritime Network
Find suppliers and repair yards worldwide

Contact details, brands served and yard capabilities in one directory.

maritimenetwork.io →
Your advert here
Reach engineers searching for exactly your brand

Book a brand slot and appear on every model page of that make.

Enquire →