Metallic Base Coat / Clear Coat System (M-series)
Alexseal Metallic Base Coat / Clear Coat System (M-series) — Specialized two-component metallic finish system for yacht topcoats; requires overcoating with Premium Topcoat 501 Clear Gloss.
Components & Design
Component data being added…
Technical Data
Related equipment 10
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Weekly washing with pH-neutral detergent formulated for paint finishes; use only soft wash mitts and brushes
Rinse with fresh water after each boat use to remove salt spray and dirt deposits
Apply high-quality wax or polymer sealer 2-3 times annually, specifically formulated for polyurethane surfaces
Prevent water accumulation between topcoat and plastic film, hardware, or fabric; address trapped moisture within days
Avoid continuous water submersion of polyurethane coatings to prevent bubbling and degradation
Remove stains immediately to prevent etching; use mild solvents first (mineral spirits, VM & P naphtha, denatured alcohol)
Use 1:1 white vinegar and warm water solution for salt residue removal, followed by mild detergent rinse
Spot repairs by experienced applicators only; use 1500-2000 grit blending area with reducer fog technique and machine buffing for gloss restoration
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →Need spare parts for this model?
We know 5+ companies supplying Alexseal METALLICBASECOAT/CLEARCOATSYSTEM(M-SERIES). Tell us what you need — we obtain the quotations for you.