Awlcraft 3000 Clearcoat
Awlgrip Awlcraft 3000 Clearcoat — Marine topside acrylic urethane clearcoat for use over Awlcraft SE basecoat, spray application only, above waterline.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Surface roughness and gloss level to be checked (DOI - Distinction of Image) before and after application
Schichtdicke mit DFT-Messgeraet verifizieren (sollte 50-75 Mikron fuer Topcoats, 25-50 Mikron fuer Basecoats entsprechen)
Adhesion test to be carried out (e.g. cross-hatch adhesion test per ISO 2409) on prepared substrate
UV and saltwater resistance to be verified in accelerated weathering tests (e.g. ASTM B117 or salt spray chamber)
Chemical resistance to diesel, alcohol, acetone and antifreeze to be checked
Monitor hardening and curing: observe drying times to touch-dry, light operational readiness and full curing
Verify mixing ratio and pot life (observe induction times, e.g. 15 min for HDT line)
Monitor surface/ambient temperature and humidity (typically 55–105°F, minimum 5°C above dew point required)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →