SeaGuard 5000 HS
Sherwin-Williams Protective & Marine SeaGuard 5000 HS — Two-component high-solids epoxy for marine anticorrosion systems and tank linings.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual examination of coating surface for signs of chalking, fading, or discoloration under UV exposure
Dry film thickness (DFT) measurement using gage to verify coating meets specification (typically 50-150 microns depending on product)
Adhesion testing via cross-hatch and holiday detection to ensure paint bond integrity to substrate
Surface cleanliness and salt contamination assessment via salt-fog testing or visual inspection for blistering/peeling
Gloss retention evaluation using gloss meter; topside coatings should maintain 70%+ of initial gloss after service exposure
Mechanical damage inspection including chips, scratches, and impact marks exposing substrate
Surface preparation verification before recoating: removal of loose paint, salt deposits, and contaminants per SSPC-SP6 or equivalent
Cure verification through hardness testing (König hardness or pencil hardness minimum per specification)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →