OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Safety & LSA› Gas Detection› Portable Multi-Gas Detector› Dräger X-am 2500

X-am 2500

Portable Multi-Gas Detector · Gas Detection

Technical data from manufacturer or class sources · not yet verified by a person
2 gasesCapacity
Hazardous Gas DetectionMedium

The Dräger X‑am 2500 is a handheld dual‑gas detector that continuously monitors oxygen and one combustible or toxic gas, providing audible/visual alarms and data logging for confined‑space entry. As a Portable Multi-Gas Detector, it is normally installed in the protected space, on the person, or at a fixed sensor point with signals returned to the relevant alarm or monitoring system. In that role, its primary purpose is to detect hazardous gas, oxygen condition, fire indication or another safety-related condition identified by the listed category. Fixed, portable, optical, heat, gas and oil-mist sensors use different principles, so calibration and functional testing must match the actual detector type. Capacity: 2 gases. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Dimensions (W x H x D)48 x 130 x 44 mm
Weight220 - 250 g
Ambient conditions - Temperature-20 to +50 °C
Ambient conditions - Pressure700 to 1300 mbar
Ambient conditions - Relative humidity10 to 95 % r.h.
Protection classIP 67
Charging time<4h
Typeportable
Gases2
Manufacturer documentation

Images from manufacturer documentation.

Photos, drawings and page previews from this model’s datasheet or catalog.

The Dräger X-am 2500 is a portable gas detector used to measure various gases in industrial and environmental settings.

Applications

  • environmental monitoring

Features

  • multi-gas detection
  • IP 67 protection
  • 360° visual alarms
  • multi-tone audible alarms

Standards

  • EN 50104
  • EN 45544
  • EN 60079-29-1
  • EN 50271
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Basic 2-gas for enclosed space entry. Bump test before each use.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Dräger: Special parts through the manufacturer. Lead time: 4-8 weeks. Gas detection sensors on board.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Dräger equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Portable Multi-Gas Detector.

Other models of the same equipment type, Dräger first.

By manufacturer DrägerHanla IMSIndustrial ScientificHoneywellRiken KeikiMSACrowconRKI InstrumentsAFRISODräger Safety AG & Co. KGaAMartek MarineOldham / 3M Gas & FlameAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Dräger models More like X-am 2500
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Dräger X-am 2500 — a part, a service call, a second opinion. Are you Dräger? Claim this brand page.

Service engineer? Write the day report for this X-am 2500 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.