OceanSphereENGINES
Library› Safety & LSA› Gas Detection› Portable Multi-Gas Detector› Dräger Drager X-am 2500 LEL/O2/CO/H2S

Drager X-am 2500 LEL/O2/CO/H2S

Portable Multi-Gas Detector · Gas Detection

Class-certified type (DNV register) · technical data sheet not yet verified​‌⁠⁠⁠‍​​‍‌‍​‍‌​‍⁠​​​

Dräger Drager X-am 2500 LEL/O2/CO/H2S is a marine Portable Multi-Gas Detector within the Gas Detection group. Equipment of this type is typically installed at the protected space, safety station or control panel location required by the vessel's fire and gas safety arrangement. Its primary duty is detection, alarm, breathing protection or fire-suppression duty associated with the Portable Multi-Gas Detector, and it depends on the detector, cylinder or extinguishing medium, control hardware, distribution components and safety interfaces remaining ready for immediate use. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with fire and gas alarm panels, release circuits, piping or nozzles where fitted, power supplies, ventilation shutdowns and other safety interlocks as applicable.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

GasesLEL/O2/CO/H2S
ATEX certifiedYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Check physical condition, accessibility, labels and service status, then verify approved tests of detectors, alarms, release circuits or breathing components as applicable. Inspect cylinders, hoses, nozzles, masks, wiring and interlocks without discharging or altering safety systems outside the approved procedure. Use maker, class and statutory documentation for exact inspection and acceptance criteria.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Hold only approved safety-system spares such as detector heads, filters or sensor caps, fuses, batteries where user-replaceable, seals, hoses, masks, nozzles and control modules according to the vessel's certified arrangement.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Dräger equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Portable Multi-Gas Detector.

Other models of the same equipment type, Dräger first.

By manufacturer DrägerHanla IMSIndustrial ScientificHoneywellRiken KeikiMSACrowconRKI InstrumentsDräger Safety AG & Co. KGaAMartek MarineOldham / 3M Gas & FlameAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Dräger models More like Drager X-am 2500 LEL/O2/CO/H2S
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Dräger Drager X-am 2500 LEL/O2/CO/H2S — a part, a service call, a second opinion. Are you Dräger? Claim this brand page.

Service engineer? Write the day report for this Drager X-am 2500 LEL/O2/CO/H2S in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.