S 967
Alfa Laval S 967 — Fuel oil separator/purifier for heavy fuel oils.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check and verify inlet temperature (should be maintained at ~95°C for optimal separation)
Inspect operating water pressure and supply lines (minimum 2 bar, maximum 8 bar typical)
Verify disc stack condition and cleanliness by visual inspection during service intervals
Examine bowl tolerances, wear, and perform bowl balance verification
Inspect and replace gaskets, seals, and O-rings for wear and corrosion
Check spindle, worm wheels, bearings, and motor for damage and proper lubrication
Verify automatic alarm/trip monitoring system is functional and in ON position
Confirm feed pump operation and check fuel oil pressure and temperature readings
Monitor motor amperage to ensure it is within normal operating range
Inspect for corrosion and erosion damage on all internal and external components
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →