Fireshield
Wilhelmsen Unitor Fireshield — Marine fireman outfit for shipboard firefighting and SOLAS compliance.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check jacket and trousers seams for damage, ensure all reflective tape remains visible and properly adhered, verify no holes, tears, or separation in fabric
Visually inspect boot rubber for cracks, deformation, sole separation from upper, check internal lining for deterioration, verify correct sizing and fit
Verify hydrostatic test date marking on all SCBA cylinders, ensure test date is within 5-year interval, check cylinder pressure maintenance at minimum 90% charge, pressure gauge condition
Check helmet shell for cracks, dents, or deformation, inspect visor for scratches or opacity (EN443/EN397 require anti-scratch/anti-fog properties), verify chin strap security and Nomex integrity, ensure reflective tape is visible
Verify annual service certificate on file, test low-pressure alarm activation, check face seal integrity and replacement schedule, inspect harness webbing for wear, test demand valve responsiveness
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →