CPS 7900 Gas-Tight Suit Type 1a EN943
Dräger CPS 7900 Gas-Tight Suit Type 1a EN943 — Hazmat response, CBRN protection, chemical incidents.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify suit/clothing can withstand 80 kW/m² flame heat flux without exceeding temperature threshold on inner surface; check time-to-temperature criteria per performance level (Level 1 vs Level 2)
Test thermal transmission against radiant heat at 40 kW/m²; measure inner surface temperature rise; verify non-melting and integrity of outer membrane
Visually inspect with hands raised fully above head and bending forward to fingertips touching ground without knee bending; ensure wrists and ankles remain covered; verify jacket-trouser overlap retained
Test water barrier integrity against liquid splash; measure water vapor transmission (breathability) across polyurethane membrane layer; verify hydrostatic pressure resistance
Verify external padding on knees/elbows; check seam integrity and stitching quality; test resistance to abrasion, tearing, and puncture; verify chemical resistance coating on polyester areas
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →