Dräger FPS 7000 Full-Face Mask
The Dräger FPS 7000 is a full‑face fire‑fighter mask designed for shipboard firefighting, featuring an integrated speaking diaphragm and SOLAS‑approved protection against smoke and heat.
Inspector Detail
▸
Common issues
- Exhalation or inhalation valve leakage causing a failed fit-check
- Visor scratching, crazing or UV degradation reducing visibility, especially after outdoor locker storage
- Head harness strap elasticity loss over time, affecting seal and quick-don ability
- Speech diaphragm degradation reducing communication clarity
- Facepiece rubber/silicone hardening or perishing with age, especially under temperature extremes
- SCBA connector/thread damage preventing correct coupling
Inspection checklist
- Visual inspection of facepiece, visor and straps for cracks, UV damage or perishing
- Positive and negative pressure fit-check per Drager procedure
- Inspect exhalation valve for damage, correct seating and free movement
- Check head harness elasticity and adjustment buckles
- Inspect SCBA connector/thread for damage and correct mating
- Verify speech diaphragm integrity
- Confirm mask is stored correctly and readily accessible per the fire control plan
- Function test as part of the monthly fire equipment inspection
Service intervals
| Fit-check and visual inspection | monthly as part of fire equipment inspection |
| Full functional test with SCBA set | per SOLAS fire drill schedule and manufacturer recommendation |
| Facepiece cleaning and disinfection | after each use, and periodically per manufacturer's procedure |
| Manufacturer service/overhaul | per Drager's recommended interval - confirm exact figure against current Drager FPS 7000 service documentation |
| Replacement (shelf life) | per Drager's stated service life for the elastomer, tracked against date of manufacture |
Typical wear limits
| Visor condition | renew on any crazing, deep scratching or reduced clarity that impairs vision - judgement-based per Drager inspection criteria, no fixed numeric limit |
| Head harness elasticity | renew when straps no longer hold adjustment or show visible cracking - condition-based |
| Facepiece rubber | renew on any hardening, cracking or loss of flexibility - condition and age based, confirm against Drager shelf-life guidance |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
Critical spares
- Exhalation valve assembly
- Head harness set
- Visor (where approved as a separate replaceable part)
- Speech diaphragm
- SCBA connector seals/gaskets
Safety
- A mask that fails a fit-check must be withdrawn from service immediately - never rely on a leaking facepiece in a smoke/toxic atmosphere
- The facepiece must be matched to a correctly functioning, in-date SCBA set - it is not respiratory protection on its own
- Verify crew familiarity with the storage location per the fire control plan - a mask that cannot be found quickly is a safety failure regardless of condition
Class survey
Firefighter's outfits and SCBA masks are checked at annual and renewal survey against SOLAS Ch. II-2 - class verifies quantity, location, in-date servicing/testing records and general condition; missing or out-of-date fit-check records are a common finding.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Annual fit test. Replace lens if scratched. Compatible with PSS series SCBA.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →