X33AF-SS-SIL2
Autronica X33AF-SS-SIL2 — Flame detection - multispectrum IR detector in stainless steel with SIL2 certification.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of detector exterior and lens/chamber areas; vacuum cleaning with brush attachment for light dust, cloth with mild detergent solution for housing
Visual verification of transparency and clarity of optical elements; test flame detector coverage and range verification using coverage verification systems
Verify removal of all dust caps and construction covers; inspect for debris or paint spray coverage; clean detector chambers if contaminated before returning to service
Verify correct voltage (10-27 VDC typical), test communication signals to fire panel, verify no loose connections or corrosion at terminals
Verify automatic daily self-test execution (24-hour cycle), confirm alarm panel receives SelfVerify status reports, check that sensitivity is within listed parameters
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →