OceanSphereENGINES
Tyco

DV-5 Deluge Valve

Instalacja zraszaczowa/tryskaczowa · Stałe instalacje gaśnicze

Dane techniczne ze źródeł producenta lub towarzystwa · jeszcze niesprawdzone ręcznie​‍‌​‌‌‌‌‌‍‌​⁠‌‌⁠‍‌⁠‍

Tyco DV-5 Deluge Valve — Standard Deluge and Preaction Fire Protection Systems (Legacy Model).

Dane techniczne

Dane techniczne.

Masz kartę katalogową producenta dla tego modelu? Wyślij ją razem z formularzem zapytania — sprawdzimy ją i podamy źródło.

Wartości referencyjne — niezweryfikowane
Sizes1-1/2 to 8 inch (DN40 to DN200)
Pressure Rating250 psi (17.2 bar) standard

Źródło: johnsoncontrols.com · nie porównano z kartą katalogową producenta

Inspekcja

Szczegóły inspektora

Typowe problemy

  • Diaphragm perishing or cracking, causing the valve to fail to open or to leak
  • Trim piping or strainer blockage (scale, marine growth) preventing valve actuation
  • Corrosion of the external resetting mechanism seizing the reset lever
  • Pilot/solenoid actuator failure in the release trim
  • Seawater scaling in trim components affecting reliable operation
  • False or failed activation traced back to a fouled or corroded detection system that triggers the valve

Lista kontrolna przeglądu

  • Visually inspect valve body, trim piping and gauges for leaks or corrosion
  • Function-test valve trip and release, both manual and remote/automatic, per maker procedure
  • Check and clean strainers in the trim system
  • Verify priming water/supply pressure gauges read correctly and within range
  • Confirm the valve resets fully and reseats without residual leakage after test
  • Inspect diaphragm condition at scheduled overhaul
  • Test the detection/alarm system that triggers the deluge valve
  • Check drain valves operate and the system fully drains after test

Interwały serwisowe

Full system function/trip testper SOLAS/flag and class requirement, commonly quarterly to annually depending on system and flag administration - confirm against the ship's fire safety maintenance plan
Trim strainer cleaningat each function test or per maker schedule
Diaphragm inspection/replacementat the maker's overhaul interval; being a legacy model, confirm current interval and material availability directly with Tyco/Johnson Controls or an approved service agent
Weekly/monthly visual and gauge checksper SOLAS fire safety maintenance requirements

Typowe interwały dla tej klasy konstrukcji, nie dane producenta dla Twojego modelu. Wiążąca jest instrukcja producenta.

Krytyczne części zamienne

  • Diaphragm/trim kit - legacy model, confirm current availability with the maker or an approved service agent before assuming a generic part fits
  • Trim strainer element
  • Pilot/solenoid actuator (if electrically released)
  • Valve cover gasket set
  • Supply/system side pressure gauges

Bezpieczeństwo

  • Accidental discharge risk during testing - warn personnel and isolate the protected area/machinery before function tests
  • Trapped pressure in trim piping - depressurise before opening the valve cover or trim components
  • Failure to actuate in a hazardous area (e.g., cargo pump room, machinery space) is a life-safety issue - treat any defect as high priority
  • As a legacy model, spares support may be limited - assess the case for replacement with a current-production deluge valve if reliability or spares become a problem

Przegląd klasyfikacyjny

Fixed fire suppression systems are statutory under SOLAS II-2. Class/flag surveys require documented function and flow test records, servicing by an approved fire safety service provider where required, and confirmation that all deluge zones actuate and drain correctly. Legacy equipment like this DV-5 is scrutinised particularly for spares support and an equivalent-replacement plan.

Potrzebujesz tej części?

Zapytaj o ofertę na ten model.

Bezpłatnie — wyślij zapytanie dotyczące sprzętu Tyco. Nasz zespół je sprawdzi i odpowie e-mailem.

W przypadku sprzętu okrętowego prawie żaden producent ani autoryzowany dystrybutor nie podaje ceny, dopóki statek jest nieznany. Z danymi statku dostępność i cenę da się ustalić szybciej; bez nich być może musimy najpierw dopytać, co kosztuje kilka dni. Jeśli nie wolno Ci podać statku, wystarczy zdjęcie tabliczki znamionowej — dołącz je poniżej lub odeślij w odpowiedzi na nasz e-mail potwierdzający.

Twoje dane kontaktowe nie są publikowane. Konto nie jest wymagane.
Powiązane modeli

Także w Instalacja zraszaczowa/tryskaczowa.

Inne modele tego samego typu sprzętu, najpierw Tyco.

Według producenta TycoMinimaxHanla IMSNAFFCOViking Group (Fire)Ultra FogMarioffDanfoss Fire Safety A/SNingbo Yonghang Fire Equipment Co., Ltd.Steel Recon IndustriesVid Fire-Kill ApSWszyscy producenciCzęści według urządzeńNowy użytkownik? Załóż darmowe konto Nieczytelna tabliczka? Wypróbuj skaner tabliczek Podobne do DV-5 Deluge Valve
Więcej, niż pokazuje karta katalogowa

Odpowiadamy e-mailem, nigdy automatem.

Powiedz nam, czego potrzebujesz do tego Tyco DV-5 Deluge Valve — części, wizyty serwisowej, drugiej opinii. Czy jesteś Tyco? Przejmij tę stronę marki.

Serwisant? Napisz raport dzienny dla tego DV-5 Deluge Valve w OceanSphere Work — zdjęcia, godziny i części, jako PDF dla armatora. Wypróbuj 14 dni za darmo →

Często pytane

Pytania, które pojawiają się przy tym sprzęcie.

Czy dane tego modelu są bezpłatne?

Tak. Dane techniczne, dokumenty i uwagi serwisowe tego modelu są dostępne bez konta. Konto dodaje zapisane wyszukiwania i zapytania, niczego nie odbiera.

Czy znajdziecie część dokładnie do tego modelu?

Tak. Podaj producenta, model i czego potrzebujesz — każde zapytanie czyta człowiek i odpowiada e-mailem.

Dane techniczne wydają się błędne — co teraz?

Wyślij nam tabliczkę lub prawidłową wartość. Sprawdzimy ją w karcie danych producenta lub rejestrze towarzystwa klasyfikacyjnego i zaktualizujemy stronę.