Water-Jet Drive Nozzle

Visually inspect nozzles for blockages; use patented Ultra Fog Nozzle Test Tool to verify piston function without breaking glass bulbs; conduct laboratory testing of nozzles after 10 years service and every 5 years thereafter

Measure discharge pressure against pump characteristic curve; check for unusual operating noise or vibration; verify flow rate capacity (35-50 L/min for P35 model); monitor motor current draw for erratic startup cycles indicating filter blockage

Verify nitrogen pre-pressure setting (typically 90% of operating pressure for 100 bar systems); test accumulator pressure switch alarm function; inspect for visible corrosion, cracks, or leakage in accumulator body; calibrate all pressure gauges annually

Document filter cleanliness condition; measure pressure differential across filters (high differential indicates clogging); perform visual inspection of inlet and outlet filter elements; clean or replace filters after system operation or annually minimum; verify dual 25µm tank filters are present and functional

Pressure test entire piping network at 1.5x maximum working pressure (150 bar minimum for 100 bar systems); inspect water supply tank interior annually for sediment/rust accumulation; flush system annually; drain and refill water tank yearly; verify air passage from nozzles is unobstructed