RO (Reverse Osmosis)
Serck Como (Wärtsilä Water & Waste) RO (Reverse Osmosis) — Marine and offshore freshwater generation from seawater.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect tubes every 6-12 months by removing manhole covers and bottom covers of heat exchangers; check for scale deposits and coating exfoliation
Remove condenser covers and inspect cooling tubes for sludge, organic fouling, or biofilm buildup; test condenser pressure regularly
Verify vacuum gauge reading (minimum 90% vacuum required); check ejector pump operation and non-condensable gas removal performance
Inspect demister element for moisture droplet separation effectiveness; test distillate conductivity for saltwater carryover (should be <4 µS/cm)
Visual inspection of titanium plate pack for pitting corrosion, cracks, or pinhole leaks; verify gasket seals and frame integrity
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →