REL010
Fort Vale REL010 — 65mm Flanged Pressure/Vacuum Super Maxi Relief Valve.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection for welded nuts, brackets, or tools attached to valve cap; Verify no third-party modifications have been made to facilitate servicing
Visual inspection of body condition for corrosion, external damage, leaks; Check for discoloration or deformation indicating stress or age degradation
Inspect seal condition for wear, cracking, deterioration; Check bonnet flange and valve body seams for minor seepage indicating seal degradation; Verify seals are properly seated and aligned
Perform manual lift test to verify lever operates freely and valve responds to manual pressure activation; Check for stiffness, resistance, or complete non-response
Conduct pressure test rig testing to verify set pressure/vacuum settings match documentation; Use Fort Vale Pressure/Vacuum Test Rig for calibration verification (6-monthly basis recommended)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →