GPLIV
Funke GPLIV — GPL-Serie Variante mit speziellen Durchflusscharakteristiken.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection for voids, porosity and predetermined fracture points in solder joints; pressure test (helium-hydrogen test gas mixture: 95% nitrogen + 5% hydrogen) for detection of microscopically small leaks through hydrogen diffusion
Visual inspection for corrosion scars, surface rust, intergranular corrosion and pitting on plate surfaces and solder lines; surface roughness measurement for early detection of erosion in aggressive media
Surface crack inspection by penetrant testing (penetrant method) or eddy current testing; thermal load monitoring through pressure and temperature difference measurement; vibration testing during rapid temperature changes
Pressure test (operating pressure + 50%), leak tests with hydrogen gas detectors; inspection for deterioration of seal through swelling or hardening; inspection of leakage gap in double-wall designs (GPLS, SPL)
Measurement of current pressure drop and comparison with nominal value; inspection flushing test with test fluid to detect deposits and contamination; cleaning when limit values are exceeded; inspection of filters for degree of contamination
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →