Sludge Separator · Separators & Purifiers
On ships and in industrial settings, the efficient separation of liquids and solids is crucial for many processes. The Alfa Laval NX 314 decanter centrifuge is a small capacity decanter that finds multiple uses for sludge thickening, biomass extraction & wastewater treatment. This horizontal de-sludging centrifuge is built for the two-phase separation of wastewater, crude oil tank bottoms, municipal sludge-thickening, industrial sludge dewatering, paint sludge handling, and more. With a 10 HP Motor, the NX 314 decanter has a bowl RPM of 4,000 and can process 25 GPM of ethanol hemp biomass slurry. The bowl diameter is 14 inches, and the bowl length is 34 inches. The beach angle is 8.5 degrees. The drive motor power is 10 HP with a gearbox ratio of 1: 159 (2.5 kN-M). The AE (Area Equivalent) is 780 and the centrifugal force is 3,157 Gs RCF. The conveyor protection features carbide tile or tungsten carbide hard-surfacing.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
Source: dolphincentrifuge.com · not checked against a manufacturer datasheet
| Bowl opening/cleaning | interval is strongly duty-dependent (sludge loading varies widely) - use running-hour or differential-pressure trigger from maker's manual, no universal figure |
|---|---|
| Bearing renewal | bauart-typical 8,000-16,000 running hours for this class of separator - confirm against maker's manual |
| Seal/gasket renewal | at each major bowl overhaul |
| Gear/belt drive inspection | every 2,000-4,000 running hours |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Bowl/disc clearance and bearing radial clearance | maker-specific for this class of separator - confirm against the equipment's own manual before condemning parts |
|---|
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
Sludge/waste separators are generally not a dedicated class survey item unless tied to a MARPOL Annex I oily-water or sludge-management requirement, in which case the surveyor will want to see the equipment's certificate, operating log, and evidence of scheduled maintenance. Note: available source data for this unit points to an industrial decanter-type centrifuge rather than a confirmed marine-specific specification, so entries here are kept to bauart-general guidance for centrifugal separators used in shipboard sludge dewatering.
Estimated lifetime: Separator bowls and drive trains of this class typically remain serviceable 15-20 years with scheduled bearing and seal renewal - confirm against maker's manual
Free of charge — send us your request for Alfa Laval equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Alfa Laval first.
Tell us what you need for this Alfa Laval NX 314 — a part, a service call, a second opinion. Are you Alfa Laval? Claim this brand page.
Service engineer? Write the day report for this NX 314 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.